This page provides access to research works by Dr. Mohd Nazree Derman, currently a Senior Lecturer of School of Mechatronic Engineering, Universiti Malaysia Perlis (UniMAP).

News

Skills and Expertise:Material Characterization,Materials,Nanomaterials,Mechanical Properties,Thin Films and Nanotechnology,Microstructure,Material Characteristics Materials Processing,Advanced Materials,Nanomaterials Synthesis,Thin Film Deposition Biomaterials,Heat Treatment,Materials Science,Nanoparticles,Thin Films,Materials Engineering,Composites,Materials Chemistry,Nanotechnology,Coating,Corrosion Nanofabrication,Nanoelectronics,Surface Characterization,Solid State Physics,Nanocomposites,Electrochemistry,Semiconductor,Carbon Nanotubes Surface Engineering,Powders,Microelectronics and Semiconductor Engineering Alloys,Casting,Microfabrication,Surface Coating,Film,Corrosion Engineering Aluminum Alloys,Aluminium,Corrosion Science,Anodization,Chitosan,Powder Metallurgy Metal Matrix Composites,Magnesium Alloys,Materials Research,Nanopores,PPM Self-Organization,Molecular Imprinting,Anodic Aluminum Oxide.

Recent Submissions

  • The effect of electrolyte temperature on formation of porous aluminium oxide films in anodising process 

    Juyana, A Wahab         ; Mohd Nazree, Derman, Dr.; Zuraidawani, Che Daud (AENSI Publisher All rights reserved, 2013-10)
    A porous aluminium oxide film formed on aluminium was prepared in a mixed electrolyte of phosphoric acid and acetic acid solution. The morphology, growth and thickness of the film were investigated. The anodising process ...
  • Electrical properties of chitosan-ferredoxin film 

    Shantini, Devi; Irwana, Nainggolan, Dr.; Mohd Nazree, Derman, Dr.; Tulus Ikhsan, Nasution (American-Eurasian Network for Scientific Information (AENSI), 2013)
    In this study, chitosan was blended with ferredoxin to further improve the electrical properties of sensing film. Chitosan powder was dissolved in 2% of acetic acidand blended with ferredoxin. The mixture was subsequently ...
  • Effect of temperature of oxalic acid on the fabrication of Porous anodic alumina from Al-Mn alloys 

    Mohd Nazree, Derman, Dr.; Foo, Kai Loong; Khairel Rafezi, Ahmad, Dr.; Uda, Hashim, Prof. Dr.; Voon, Chun Hong (Hindawi Publishing Corporation, 2013)
    The influence of temperature of oxalic acid on the formation of well-ordered porous anodic alumina on Al-0.5 wt% Mn alloys was studied. Porous anodic alumina has been produced on Al-0.5 wt% Mn substrate by single-step ...
  • Electrochemical corrosion behaviour of Mg-(Ca,Mn) sacrificial anodes 

    Shaiful Rizam, Shamsudin; Azmi, Rahmat, Assoc. Prof. Dr.; Mahdi, Che Isa; Mohd Nazree, Derman, Dr.; Abdul Razak, Daud (Trans Tech Publications, 2013)
    The aim of the study is to identify the effect of Ca in Mg-Mn alloy on electrochemical corrosion behavior for the development of high performance sacrificial anode. Mg alloys were fabricated by casting technique under an ...
  • Corrosion behaviour of anodised powder metallurgy aluminium-magnesium composites 

    Mohd Nazree, Derman, Dr.; Kamrosni, Abdul Razak (Trans Tech Publications, 2013)
    The corrosion behavior of anodized powder metallurgy Al/2wt%Mg composites reinforced with the short fibre alumina Saffil™ was studied using potentiodynamic polarization in 3. 5% NaCl solutions. The materials under investigation ...
  • Effect of deposition time on properties of ZrO2 coating prepared using electrolytic method 

    Siti Hawa, Mohamed Salleh; Terng, Lim Wuh; Mohd Nazree, Derman, Dr.; Mohd Zaidi, Omar; Salmie Suhana, Che Abdullah (Trans Tech Publications, 2013)
    AISI 440C martensitic stainless steel is one of the most widely studied engineering materials for its tribological properties. It is capable of attaining the best mechanical properties such as high strength and hardness ...
  • A simple one-step anodising method for the synthesis of ordered porous anodic alumina 

    Voon, Chun Hong; Mohd Nazree, Derman, Dr.; Uda, Hashim, Prof. Dr.; Khairel Rafezi Ahmad, Dr.; Ho, Li Ngee (Taylor & Francis, 2014)
    Porous anodic alumina (PAA) has been produced on aluminium substrate by single-step anodising at 50 V in 0.3 M oxalic acid at 15°C for 60 min. The highly ordered pore and cell structure was achieved by subjecting the PAA ...
  • Cu-SiCp composites as advanced electronic packaging materials 

    Azmi, Kamardin; Mohd Nazree, Derman, Dr.; Mohd Mustafa Al Bakri, Abdullah; Sandu, A.V. (Trans Tech Publications, 2014)
    The demand for advanced thermal management materials such as silicon carbide particles reinforced copper matrix (Cu-SiCp) composites is increasing due to the stringent design requirement in the electronic packaging industries. ...
  • A study on the effect of modified electrolyte to the formation of AAO membrane in anodising process 

    Juyana, A Wahab; Muhamad Nur, Misbah; Nurul Diyana, Jamil; Mohd Nazree, Derman (Trans Tech Publications, 2013)
    The formation of anodic aluminium oxide (AAO) membrane in anodising process has been studied. The anodising process was done in two different type of electrolyte which are single phosphoric acid and a mixture of phosphoric ...
  • Electrochemical characterisation of hybrid activators for aluminium sacrificial anodes in natural sea water 

    Mohd Subhi, Din Yati; Mohd Nazree, Derman, Dr.; Mahdi, Che Isa; Mohd Moesli, Mohammad; Hasril, Nain (Malaysian Citation Centre & Ministry of Education, 2013)
    This paper reports on the electrochemical behaviour of as-cast Al-Zn-Mg alloys activated by tin (Sn) and ruthenium dioxide (RuO2) in natural sea water. The potential and advantages of Sn and RuO2 as hybrid activators in ...
  • Effect of heat treatment on microstructure and corrosion behavior of Az91d magnesium alloy 

    Chye, Lih T.; Mohd. Zamzuri, Mohammad Zain; Siti Norbahiyah, Mohamad Badari; Khairul Azwan, Ismail, Dr.; Mohd Nazree, Derman, Dr.; Suhaimi, Illias (Trans Tech Publications, 2013)
    An AZ91D ingot in the as-cast condition was homogenized by heat treatment process. Then, the microstructures produced and corrosion behaviour after heat treatment was studied in detail. As-cast AZ91D was recrystallize by ...
  • Surface morphology and corrosion behavior of electrolytic coatings in different aqueous solutions 

    Siti Hawa, Mohamed Salleh; Mohd Nazree, Derman, Dr.; Mohd Zaidi, Omar; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
    ZrO₃/AI₂O₃, AI₂O₃/Y₂O₃, ZrO₂/Y₂O₃ coatings were applied on SS440C steel substrates via an electrolytic double layer coating process. The effect of these different ceramic aquecous solutions on the surface morphology and ...
  • Different concentration of Al(No₃)₃ In Zro₂/Al₂o₃ double layer coating steel prepared by electrolytic method 

    Siti Hawa, Mohamed Salleh; Mohd Nazree, Derman, Dr.; Mohd Zaidi, Omar; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
    Stainless steels, such as 440C steel are commonly used for engineering applications. The high carbon contents of this steel have significantly been attributed to low corrosion resistance properties. Surface modification ...
  • Comparison study in consolidation of yttria reinforced iron-chromium composites using conventional and microwave sintering technique 

    Marina, Marzuki; Mohd Zamzuri, Mohammad Zain; Mohd Nazree, Derman, Dr.; Mohd Asri, Selamat; Nooraizedfiza, Zainon (Trans Tech Publications, 2014)
    This research is focused on studying the density and mechanical properties of iron-chromium composites consolidated by innovative rapid microwave sintering technology against conventionally sintered counterparts using slow ...
  • Effect of anodizing voltage on the morphology and growth kinetics of porous anodic alumina on Al-0.5 wt% Mn alloys 

    Voon, Chun Hong; Mohd Nazree, Derman, Dr.; Uda, Hashim, Prof. Dr.; Foo, Kai Loong; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)
    In this study, the effect of anodizing voltage on the morphology of porous anodic alumina and growth kinetics of anodizing of aluminium manganese alloy was reported. It was found that the increasing anodizing voltage affect ...
  • Grafting amino-acid molecular imprinted polymer on carbon nanotube for sensing 

    N. Farhanah, Ab. Halim; Mohd Noor, Ahmad, Prof. Dr.; Ali Yeon, Md Shakaff, Prof. Dr.; Mohd Nazree, Derman, Dr. (Elsevier Ltd., 2013)
    Molecular imprinted polymer (MIP) is a good matrix that exhibit satisfactory recognition ability when integrated onto sensing transducer. We report on the preparation of such material by graft-polymerizing MIP on the surface ...
  • Corrosion behavior of Al-Cu-Ni-Y alloys 

    Mohd Nazree, Derman, Dr.; Mohd Jeffry, Radzi; Kumar, R. (Trans Tech Publications, 2013)
    Al based alloy has been widely used in various industries. This research paper aims at the investigation onto the effect of the percentage of Cu and Ni alloying elements in the corrosion behavior of Al-Cu-Ni alloys. The ...
  • The corrosion studies of powder metallurgy Co-Cr-Mo (F-75) alloy 

    Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Nazree, Derman, Dr.; Juyana, A Wahab          (AENSI Publisher All rights reserved, 2013-10)
    Co-Cr-Mo (F-75) alloy was investigated for biomedical application due to its mechanical properties and good corrosion resistance. This study has been focusing on the corrosion behavior of PM Co-Cr-Mo alloy. The Co-Cr-Mo ...
  • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

    Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
    Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...
  • Synthesis and characterization of electroless copper coated SiC particles 

    Azmi, Kamardin; Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman, Dr. (Trans Tech Publications, 2013)
    Silicon carbide reinforced copper matrix (Cu-SiCp) composites fabricated via the conventional powder metallurgy methods have inferior thermophysical properties due to the weak bonding between the copper matrix and the SiCp ...

View more