Show simple item record

dc.contributor.authorShamsul Baharin,  Jamaludin, Prof. Dr.
dc.contributor.authorMazlee, Mohd Noor, Dr.
dc.contributor.authorShahzan Kamarul, A. Kadir
dc.contributor.authorKhairel Rafezi, Ahmad, Dr.
dc.date.accessioned2014-04-15T14:31:46Z
dc.date.available2014-04-15T14:31:46Z
dc.date.issued2013
dc.identifier.citationAdvanced Materials Research, vol. 795, 2013, pages 74-77en_US
dc.identifier.isbn978-303785811-0
dc.identifier.issn1022-6680
dc.identifier.urihttp://www.scientific.net/AMR.795.74
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/33717
dc.descriptionLink to publisher's homepage at http://www.ttp.net/en_US
dc.description.abstractJoining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: E6013). The mechanical properties of welded joint were investigated by tension test. It was observed that, the yield strength and tensile strength of welded samples using mild steel welding electrode were slightly lower than welded samples using stainless steel welding electrode. All welded samples fractured at mild steel base metal indicated that the regions of stainless steel base metal, fusion zone and heat affected zone are stronger than mild steel base metal.en_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectMechanical propertiesen_US
dc.subjectSpot weldingen_US
dc.subjectTensile shearen_US
dc.titleMechanical properties of dissimilar welds between stainless steel and mild steelen_US
dc.typeArticleen_US
dc.contributor.urlsbaharin@unimap.edu.myen_US
dc.contributor.urlmazlee@unimap.edu.myen_US
dc.contributor.urlrafezi@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record