Show simple item record

dc.contributor.authorShamsul Baharin,  Jamaludin, Prof. Dr.
dc.contributor.authorMazlee, Mohd Noor, Dr.
dc.contributor.authorMuhammad Rifki, Ismail
dc.contributor.authorKhairel Rafezi, Ahmad, Dr.
dc.contributor.authorKamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.
dc.date.accessioned2014-04-15T14:14:57Z
dc.date.available2014-04-15T14:14:57Z
dc.date.issued2013
dc.identifier.citationAdvanced Materials Research, vol. 795, 2013, pages 87-90en_US
dc.identifier.isbn978-303785811-0
dc.identifier.issn1022-6680
dc.identifier.urihttp://www.scientific.net/AMR.795.87
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/33716
dc.descriptionLink to publisher's homepage at http://www.ttp.net/en_US
dc.description.abstractStudies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and tensile peel load were determined on the joint of welded specimens. The results showed that the value of tensile shear load was lower than tensile peel load. The strength of the joint increased with the increasing of welding current and welding cycle used in the welding process.en_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectMechanical propertiesen_US
dc.subjectSpot weldingen_US
dc.subjectTensile shearen_US
dc.titleEffect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheetsen_US
dc.typeArticleen_US
dc.contributor.urlsbaharin@unimap.edu.myen_US
dc.contributor.urlmazlee@unimap.edu.myen_US
dc.contributor.urlrafezi@unimap.edu.myen_US
dc.contributor.urlvc@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record