Now showing items 35-54 of 88

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...
    • The effects of solutionizing temperatures on microstructures of as-received A357 alloy 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Shaiful Rizam, Shamsuddin; Mohabattul Zaman, SNS Bukhari; Khairel Rafezi, Ahmad; Raudhah, Othman (Universiti malaysia Perlis, 2009-12-01)
      Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ...
    • The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ...
    • The effects of welding current and welding duration on the shear strength of spot welded austenitic stainless steel 

      Shamsul Baharin, Jamaludin; Ooi, Woei Ming; Mazlee, Mohd Noor; Khairel Rafizi, Ahmad (Universiti Malaysia Perlis, 2009-12-01)
      Introduction: Resistance spot welding is commonly employed in the fabrication of sheet metal assembly. It can be applied to join metals such as low carbon steel, nickel, aluminum, titanium, copper alloy, stainless steel ...
    • Enviro Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Madya Dr.; Che Mohd. Ruzaidi, Ghazali; Chek Idrus, Omar (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      Aluminium has been recycled since the days it was first commercially produced and today recycled aluminium accounts for one-third of global aluminium consumption worldwide.
    • Erosion corrosion of PM Aluminium Reinforced with Alumina Saffil in NaCI and sand solution 

      Mohd Nazree, Derman; Mohd Faiz, Bahardin; Kamrosni, Abdul Razak; Noraziana, Parimin; Zaherudin, Kasmuin; Shamsul Baharin, Jamaludin (Universiti Teknologi Malaysia (UTM), 2007-11-26)
      The erosion-corrosion behaviour of anodised and non anodised PM aluminium matrix composite in sodium chloride (NaCl) containing sand has been studied. The AI composite reinforced with 15 wt % short fibre alumina Saffil ...
    • Extraction and separation of Cu(II), Ni(II) and Zn(II) by sol-gel silica immobilized with Cyanex 272 

      Fazlul Bari; Noorzahan, Begum; Kamarudin, Hussin; Samsul Baharin, Jamaludin (Elsevier B.V., 2009-03)
      The extraction and separation of Cu(II), Ni(II) and Zn(II) from aqueous sulfate-acetate solution were carried out using solid phase sol-gel silica containing immobilized Cyanex 272 {bis(2,4,4-trimethylpentyl)phosphinic ...
    • Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3 

      Saidatulakmar, Shamsuddin; Shamsul, Baharin Jamaludin, Prof. Dr.; Zuhailawati, Hussain, Dr.; Zainal Arifin, Ahmad, Prof. (Trans Tech Publications, 2013)
      Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ...
    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...
    • The fabrication of artificial marble from dolomite (Batu Reput) 

      Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)
      Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ...
    • Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties 

      Nur Izzati, Muhd Nadzri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd. Noor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ...
    • Husk Board: A Panel Board from Waste 

      Suhardy, Daud; Tengku Nadzlan, Tengku Ibrahim; Farizul Hafiz, Kasim; Mohd Nazry, Salleh; Mohabattul Zaman, NS Bukhari, Ir.; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohammed Zulkali, Mohammed Daud, Prof. Madya Dr.; Saiful Azhar, Saad; Wan Su, Haron (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      The invention is about a husk board, manufactured from rice husk. Rice husk is about industrial waste. The rice husks were blended with binder and a hardener before compaction by using hot press.
    • The influence of particle sizes and compaction pressure on surface hardness of aluminum composite fabricated via powder metallurgy 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Zamri, Yusoff (INSInet Publications, 2011)
      A statistical analysis was used to anticipate the influence of particles sizes and compaction pressure on surface hardness of aluminum composites after compacted in a rigid die under an uniaxial compaction. Al-20 wt.% slag ...
    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Fazlul, Bari (Universiti Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...
    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...
    • Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Ayusnida, S. (SIRIM, 2010-11-22)
    • Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment 

      Nur Farhana, Hayazi; Mazlee, Mohd Noor, Dr.; Shaiful Rizam, Shamsudin; Nur Farhana, Hayazi; Tan, Alvin Yin Zhen (Trans Tech Publications, 2013)
      Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...
    • Kayan 1: a Particle Board from Rice Husk 

      Suhardy, Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohd Nazry, Salleh; Farizul Hafiz, Kassim; Saiful Azhar, Saad; Tengku Nadzlan, Tengku Ibrahim; Wan Su, Haron; Mohamed Zulkali, Mohamed Daud, Prof. Madya Dr. (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.
    • KUKUM Artificial Marble 

      Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Mohd. Sobri, Idris; Mohd. Nazry, Salleh (Malaysian Invention and Design Society (MINDS), 2005-05-19)
      KUKUM Artifcial Marble based on polymer resin (thermoset or thermoplastic) and dolomite to create an artificial material that outperform and look like natural marble or tile physically, thermally and mechanically.