Now showing items 42-61 of 88

    • Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3 

      Saidatulakmar, Shamsuddin; Shamsul, Baharin Jamaludin, Prof. Dr.; Zuhailawati, Hussain, Dr.; Zainal Arifin, Ahmad, Prof. (Trans Tech Publications, 2013)
      Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ...
    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
    • Fabrication and mechanical properties of composite palm ash mixed with phenolic resins 

      Mohd Radzi, Ali; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi; Che Mohd Ruzaidi, Ghazali, Prof. Madya (International Network for Scientific Information Publication (INSI), 2011-11)
      Brake pad is one of the important engineering components in automobile and it is fabricated by combination of various materials. Asbestos is one of the components in brake pad that is harmful to the human. In this ...
    • The fabrication of artificial marble from dolomite (Batu Reput) 

      Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)
      Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ...
    • Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties 

      Nur Izzati, Muhd Nadzri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd. Noor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ...
    • Husk Board: A Panel Board from Waste 

      Suhardy, Daud; Tengku Nadzlan, Tengku Ibrahim; Farizul Hafiz, Kasim; Mohd Nazry, Salleh; Mohabattul Zaman, NS Bukhari, Ir.; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohammed Zulkali, Mohammed Daud, Prof. Madya Dr.; Saiful Azhar, Saad; Wan Su, Haron (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      The invention is about a husk board, manufactured from rice husk. Rice husk is about industrial waste. The rice husks were blended with binder and a hardener before compaction by using hot press.
    • The influence of particle sizes and compaction pressure on surface hardness of aluminum composite fabricated via powder metallurgy 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Zamri, Yusoff (INSInet Publications, 2011)
      A statistical analysis was used to anticipate the influence of particles sizes and compaction pressure on surface hardness of aluminum composites after compacted in a rigid die under an uniaxial compaction. Al-20 wt.% slag ...
    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Fazlul, Bari (Universiti Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...
    • Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications 

      Mohd Afian, Omar; Shamsul Baharin, Jamaludin, Prof. Dr.; Nurazilah, Mohd Zainon; Norazlan, Roslani; Mohd Nizam, Abd Jalil; Mohd Bakri, Mohd Hijazi; Ahmad Zahid, Omar; Noorsyakirah, Abdulah (Trans Tech Publications, 2014-01)
      Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...
    • Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Ayusnida, S. (SIRIM, 2010-11-22)
    • Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment 

      Nur Farhana, Hayazi; Mazlee, Mohd Noor, Dr.; Shaiful Rizam, Shamsudin; Nur Farhana, Hayazi; Tan, Alvin Yin Zhen (Trans Tech Publications, 2013)
      Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...
    • Kayan 1: a Particle Board from Rice Husk 

      Suhardy, Daud; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Mohd Ghazali, Prof. Madya; Mohd Nazry, Salleh; Farizul Hafiz, Kassim; Saiful Azhar, Saad; Tengku Nadzlan, Tengku Ibrahim; Wan Su, Haron; Mohamed Zulkali, Mohamed Daud, Prof. Madya Dr. (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.
    • KUKUM Artificial Marble 

      Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Mohd. Sobri, Idris; Mohd. Nazry, Salleh (Malaysian Invention and Design Society (MINDS), 2005-05-19)
      KUKUM Artifcial Marble based on polymer resin (thermoset or thermoplastic) and dolomite to create an artificial material that outperform and look like natural marble or tile physically, thermally and mechanically.
    • Mechanical properties and fracture behaviour of coconut fibre-based green composites 

      Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)
      This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ...
    • Mechanical properties and morphology of palm slag, calcium carbonate and dolomite filler in brake pad composites 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2013)
      The development of asbestos free brake pad composites using different fillers was investigated with a intention to substitute asbestos which is known hazardous and carcinogenic. Mechanical and morphology studies were made ...
    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...
    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...
    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.
    • The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy 

      Khairel Rafezi Ahmad; Wong Jing Lee; Ruhiyuddin Mohd Zaki; Mazlee Mohd Noor; Mohd Fitri Mohamad Wahid; Shaiful Rizam Shamsudin; Shamsul Baharin Jamaludin, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...
    • Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy 

      Mazlee, Mohd Noor; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shaiful Rizam, Shamsudin (University of Malaya, 2009)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ...