The behaviours of steel fiber as main reinfocement in high performance slurry infiltrated fiber reinforced concrete
Date
2014Author
Mustaqqim, Abdul Rahim
Zuhayr, Md Ghazaly
Ragunathan, Santiagoo
Shahiron, Shahidan
Metadata
Show full item recordAbstract
Normally, the concrete structure fabricated by combining steel bars as main reinforcement to the concrete mix. In this methid, the steel fiber is randomly distributed in the mould before the concrete slurry takes place. In this study, high grade concrete slurry grade 80 was used. In order to determine the behavior of the steel fiber as reinforcement in concrete, three different percentage of steel fiber used, 3%, 4%, 5% and also the control sample without fiber. Sizes of prism used in this study are 100 x 100 x 500mm. The behavior of the steel fiber was investigated by using-two-point load test until failure. The load-defelection data was recorded from the two-point load test. Based on the result, it was concluded that the optimum steel fiber content in this report was 5% by volume friction which provided the highest flexural strength and deflection.
Related items
Showing items related by title, author, creator and subject.
-
The potential of light transmission using fibre optic cable for interior illumination in Malaysia
Norazalina, Ismail (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)This project discussed about the potential of light transmission using fiber optic cable (FOC) for interior illumination. Light system and method to a building is dark where a surface that allocated in building roof top ... -
Effect of Silane Treatments and Fiber Loadings on Tensile Properties of Coir Fiber Reinforced Composites
Al Emran Ismail; Mohd Hisham Sa'at (Kolej Universiti Kejuruteraan Utara Malaysia, 2006)Nowadays, increasing awareness of replacing synthetic fiber by glass fiber has emerged due to environmental problems and pollution. Automotive manufactures also seek new material especially biodegradable material to be ... -
The effect of flame retardant additive on the properties of kenaf/polyurethane foam composite
Nur Suhaili, Mohd SoberiThis research is mainly focused on the preparation and characterization of polyurethane foam (PUF) with the addition of kenaf fiber and flame retardants, which are expandable graphite (EG) and aluminum hydroxide (ATH). ...