Now showing items 96-115 of 136

    • Photovoltaic characteristics of hybrid MEH-PPV-nanoparticles compound 

      Ali Hussain, Reshak, Prof. Dr.; Mukhzeer, Mohamad Shahimin, Dr.; Nurjuliana, Juhari; Vairavan, R. (Elsevier B.V., 2013)
      Organic solar cell research has vastly developed in recent years. These organic solar cells however are still limited to low power conversion efficiencies. This has led to the generation of photovoltaic cells based on ...
    • Physical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends - The effects of TOR as a compatibilizer 

      Ahmad Azrem, Azmi; Nik Noriman, Zulkepli, Dr.; Razif, Mohammad Nordin, Dr.; Sam, Sung Ting, Dr. (Trans Tech Publications, 2014)
      The effects of physical and morphological properties of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends were investigated. Blends. Both uncompatibilised and compatibilised ...
    • Physicochemical properties of pyrolitic carbon black from waste tyres 

      Umi Fazara, Md. Ali, Dr.; Ishak, Jainoo; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Fahmi, Muhammad Ridwan, Dr. (Trans Tech Publications, 2014)
      Waste tyres which are mainly generated from automotive industries have become a major environmental problem to the local authorities, the tyre industries and tyre dealer. When tyres are no longer usable due to worn-out, ...
    • Potential of conformal cooling channels in rapid heat cycle molding: a review 

      Shayfull Zamree, Abd Rahim; Safian, Sharif; Azlan, Mohd Zain; Rozaimi, Mohd Saad; Mohd Fathullah, Ghazli@ Ghazali (Wiley Periodicals, Inc., 2014)
      Rapid heat cycle molding (RHCM) can eliminate the weld line, increase flow length, and improve surface quality of the molded parts. However, the cycle time is much longer as compared to the conventional injection-molding ...
    • Production of silicon carbide via grinding and heat treatment process 

      Noorina Hidayu, Jamil; Xian, W. Hui; Wan Mohd Arif, Wan Ibrahim; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki (Trans Tech Publications, 2014)
      This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...
    • Properties and behavior of Geopolymer Concrete Subjected to Explosive Air Blast Loading: a review 

      Nurul Aida, Mohd Mortar; Kamarudin, Hussin; Rafiza, Abdul Razak; Mohd Mustafa Al Bakri, Abdullah; Ahmad Humaizi, Hilmi; Andrei Victor, Sandu (EDP Sciences, 2017)
      The severe damage to civilian buildings, public area, jet aircraft impact and defense target under explosive blast loading can cause a huge property loss. Most of researcher discusses the topics on design the concrete ...
    • Properties of fresh palm oil fuel ash based geopolymer material 

      Moslih Amer, Salih; Abang Abdullah, Abang Ali, Ir. Prof.; Ramazan, Demirboga; Mohd Mustafa Al-Bakri, Abdullah (American-Eurasian Network for Scientific Information (AENSI), 2013-10)
      In this paper, palm oil fuel ash (POFA) was used as the soul material to produce geopolymer binder. Sodium silicate mixed with sodium hydroxide was used as alkaline activator to activate the palm oil fuel ash. Activator ...
    • Properties of natural rubber/ethylene propylene diene monomer/recycled latex catheter (NR/EPDM/rLC) ternary blends: Cure characteristics and hardness 

      Lokman Hakim, Ibrahim; Nik Noriman, Zulkepli, Dr.; Sam, Sung Ting, Dr.; Luqman, Musa; Rosniza, Hamzah (Trans Tech Publications, 2013-12)
      Currently, the recycled rubber widely being used in rubber technology. Due to difficulty on reprocessing techniques, the vulcanized rubbers being a big problem in the recycled field. One of the main forms of discharge ...
    • Radiation shielding characteristics of concretes incorporates different waste materials 

      Ali Basheer, Azeez; Kahtan Sadiq, Muhammed, Dr.; Mohd Mustafa Al Bakri, Abdullah; Hana, Ihsan Hasan (Trans Tech Publications, 2014)
      Samples of concrete incorporate different waste materials such as iron filings, iron balls of used ball bearings and slags from steel industry were assessed for their anti-radiation attenuation coefficient properties. The ...
    • Review on the various ash from palm oil waste as geopolymer material 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Advanced Study Center Co. Ltd., 2013)
      The solid waste from palm oil mill industry has been increasing annually where it has been reported that the palm oil waste was produced 4 million tons/years in Malaysia only. Hence, the solution to overcome the problems ...
    • Roles of imputation methods for filling the missing values: A review 

      Norazian, Mohamed Noor; Ahmad Shukri, Yahaya, Prof. Madya; Nor Azam, Ramli, Prof. Dr.; Noor Faizah Fitri, Md. Yusof, Dr.; Mohd Mustafa Al Bakri, Abdullah (AENSI Publisher All rights reserved, 2013-10)
      Missing data are often encountered in many areas of research. Complete case analysis and indicator method can lead to serious bias. One of the comforting methods is implementation of imputation methods. The main purpose ...
    • The root caused analysis of leakaged heat exchanger tube 

      Shaiful Rizam, Shamsudin; Mohd Arif Anuar, Mohd Salleh; Azmi, Rahmat, Assoc. Prof. Dr.; Mazlee, Mohd Noor, Dr.; Mohd Harun; Hafizal, Yazid (Carl Hanser Verlag GmbH & Co., 2015-03)
      AISI type 316L stainless steel was used as a heat exchanger tube material in an inter-cooler column. After less than a year of operation, severe corrosion failures occurred and a transverse opening leakage was observed on ...
    • Strength development and elemental distribution of dolomite/fly ash geopolymer composite under elevated temperature 

      Emy Aizat, Azimi; Mohd Mustafa Al Bakri, Abdullah; Vizureanu, Petrica; Mohd Arif Anuar, Mohd Salleh; Sandu, Andrei Victor; Chaiprapa, Jitrin; Yoriya, Sorachon; Kamarudin, Hussin; Ikmal Hakem, Aziz (MDPI AG, 2020-02)
      A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow ...
    • Strength of the weld line and warpage defects on the molded parts in injection molding process 

      S. M., Nasir; Khairul Azwan, Ismail, Dr.; Shayfull Zamree, Abd Rahim; Norshah Afizi, Shuaib (Praise Worthy Prize S.r.l., 2013)
      Strength at weld the line location and warpage problem in injection molding plastic component were not new problems in injection molding industries. Many researchers had emerged with several improvement techniques to reduce ...
    • Strength, density and water absoprtion of Palm oil boiler ash (POBA) geopolymer brick/IBS brick 

      Zarina, Yahya; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Rafiza, Abd Razak (Trans Tech Publications Ltd., 2016-01)
      Geopolymer or alkali-activated binder is produced by synthesizing aluminosilicate source materials with an alkaline activator solution. This study has been conducted to produce palm oil boiler ash (POBA) geopolymer brick/IBS ...
    • Structural, chemical bonding, electronic and magnetic properties of KMF₃ (M = Mn, Fe, Co, Ni) compounds 

      Hayatullah; Murtaza, G.; Khenata, R.; Muhammad, S.; Ali Hussain, Reshak, Prof. Dr.; Wong, Kin Mun; Bin Omran, S.; Zeyad A., Alahmed (Elsevier, 2014-04)
      KMF₃ (M = Mn, Fe, Co, Ni) compounds crystallize in the cubic perovskite structure with space group Pm3m (#221) at ambient conditions. Structural, chemical bonding, electronic and magnetic properties of these compounds are ...
    • Structural, elastic, thermal, electronic and optical properties of Ag₂O under pressure 

      Haleem Ud Din; Ali Hussain, Reshak, Prof. Dr. (Elsevier, 2014-02)
      In present paper, the structural, elastic, thermal, electronic, optical properties at ambient and high-pressure study of Ag₂O are performed using the full-potential linearized augmented plane wave (FP-LAPW) method within ...
    • Structural, electronic and optical properties in earth-abundant photovoltaic absorber of Cu₂ZnSnS₄ and Cu₂ZnSnSe₄ from DFT calculations 

      Ali Hussain, Reshak, Prof. Dr.; Nouneh, K.; Kityk, I.V.; Jiri, Bila; Auluck, S.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sekkat, Z. (ESG, 2014)
      DFT analyses of band structure dispersion and of contribution of different anionic sub-groups to the studied electronic structure together with the anisotropy of optical functions were performed for the two promising solar ...
    • Structural, electronic, and optical properties of orthorhombic and triclinic BiNbO4 determined via DFT calculations 

      Litimein, F; Rabah, Khenata, Prof. Dr.; Gupta, Sanjeev Kumar, Prof.; Murtaza, Ghulam, Assoc. Prof.; Ali Hussain, Reshak, Prof. Dr.; Abdelmadjid, Bouhemadou; Saad, Binomran; Masood, Yousaf; Jha, Prafulla Kumar (Springer Science+Business Media New York., 2014-11)
      We performed ab initio calculations using the FPLAW method with the local density approximation (LDA) implemented in the WIEN2 k code for the orthorhombic (α) and triclinic (β) phases of BiNbO4. The modified Becke-Johnson ...
    • A study of liberation and separation process of metals from printed circuit boards (PCBS) scraps 

      Aimi Noorliyana, Hashim; Mohd Zaheruddin, Kasmuin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013-12)
      Since the metallic elements are covered with or encapsulated by various plastic or ceramic materials on printed circuit boards (PCBs), a pre-treatment process allowing their liberation and separation is first needed in ...