Browsing Mohd Shukry Abdul Majid, Assoc. Prof. Ir. Dr. by Author "Mohd Shukry, Abdul Majid, Dr."
Now showing items 1-20 of 27
-
3D finite element stress analysis of butt adhesively bonded dissimilar joint: effect of bond thickness on strength
Izzawati, Basirom; Mohd Afendi, Rojan, Dr.; M. Afif; Siti Nurhashima; Ruslizam, Daud, Dr.; Nasrul Amri, Mohd Amin, Dr.; Mohd Shukry, Abdul Majid, Dr. (Trans Tech Publications, 2014-06)The butt joint is the most studied type of adhesive joints in the literature. However, the joint strength prediction of joints is still a controversial issue as it involves a lot of factors that are difficult to quantify ... -
Application of frame energy based DCT moments for the damage diagnosis in steel plates using FLNN
Paulraj, Murugesa Pandiyan, Prof. Dr.; Sazali, Yaacob, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Krishnan, Pranesh (IEEE Conference Publications, 2012-12)This paper discusses the application of frame energy based Discrete Cosine Transformation (DCT) moment features for the detection of damages in steel plates. A simple experimental model is devised to suspend the steel ... -
Dielectric spectroscopy of pharmaceutical drug (Paracetamol) dosage in water
Cheng, Ee Meng, Dr.; Mohd Fareq, Abd. Malek, Dr.; Farrah Salwani, Abdullah; Wee, Fwen Hoon; Khor, Shing Fan; Lee, Yeng Seng; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Shahriman, Abu Bakar, Dr.; Wan Khairunizam, Wan Ahmad, Dr.; Liyana, Z. Y. (IEEE Conference Publications, 2013-12)This paper discuss about the dielectric measurement on different concentration of pharmaceutical drug using Agilent 85070E High-Temperature and Slim form probe. A microwave dielectric measurement is set up to measure dosage ... -
Effect of adhesive thickness on adhesively bonded T-joint
A. R., Abdullah; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr. (IOP Publishing Ltd, 2013)The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel ... -
Effect of nano-clay and their dispersion techniques on compressive properties of unsaturated polyester resin
Fartini, Mohd Suhut; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Azizul, Mohamad (Trans Tech Publications, 2014-06)This paper aims to understand the relationship between processing parameters and compressive properties of nanoclay filled polyester resin (dispersion method and wt% of nanoclay particles). Unsaturated polyester resin with ... -
Effects of elevated temperatures on the compression strength of nanoclay filled unsaturated polyester resin
Fartini, Mohd Suhut; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad (Trans Tech Publications, 2014-06)The paper describes the effects of the montmorillonite (MMT) fillers commonly known as nanoclay, on the compression properties of unsaturated polyester resins at different weight percentage of nanoclay. Modified resin ... -
Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes
Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Gibson, A. G.; M., Hekman (Trans Tech Publications, 2013)This paper presents an experimental investigation into the influence of winding angles in multiaxial ultimate elastic wall stress (UEWS) tests of glass-fibre reinforced epoxy (GRE) composite pipes. Currently, UEWS test is ... -
Electrical properties investigation of unsaturated polyester resin with carbon black as fillers
R., Revati; Shuhaida, Yahud, Dr.; Mohd Shukry, Abdul Majid, Dr. (Trans Tech Publications, 2014-06)In this paper, conducting polymer composites were prepared by adding different percentage of carbon black (2, 4, 6 and 8)% to unsaturated polyester resin. Hence, this project focuses on two types of carbon black which is ... -
Experimental investigation of PCM spheres in thermal energy storage system
Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Bruno, Frank, Dr.; Belusko, Martin (Trans Tech Publications, 2013)This paper presents the experimental result of a small scale packed bed of random spheres with encapsulated PCM being charged and discharged. A vapor compression refrigerator and heated room with fan heater were used to ... -
General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading
Azizul, Mohamad; Mohd Afendi, Rojan, Dr.; M, Hekman; Gibson, A.G; Mohd Shukry, Abdul Majid, Dr.; Nasrul Amri, Mohd Amin, Dr.; Ruslizam, Daud, Dr.; Meng, Cheng Ee, Dr. (Trans Tech Publications, 2014)This paper presents the modelling of a general lifetime performance for glass fibre reinforced epoxy (GRE) composite pipes similar to the well-known Tsai-Hill interactive failure criterion. Tsai Hill criterion is based ... -
General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading
Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Nasrul Amri, Mohd Amin; Ruslizam, Daud, Dr.; Azizul, Mohamad; Cheng, E.M.; Gibson, A.G.; M. Hekman (Trans Tech Publications, 2014)This paper presents the modelling of a general lifetime performance for glass fibre reinforced epoxy (GRE) composite pipes similar to the well-known Tsai-Hill interactive failure criterion. Tsai Hill criterion is based on ... -
The interlaminar shear strength test of helical wound glass fibre reinforced epoxy laminates subjected to hydrothermal ageing
Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; M. Hekman (Trans Tech Publications, 2014-06)This paper presents the experimental investigation of interlaminar shear strength (ILSS) tests of helical wound glass fibre reinforced epoxy (GRE) pipes subjected to hydrothermal ageing. Currently, the test is being used ... -
Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate
Ruslizam, Daud, Dr.; Ahmad Kamal Ariffin, Mohd. Ihsan, Prof. Dr.; Shahrum, Abdullah, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr. (Trans Tech Publications, 2013)Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction is ... -
Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes
Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Cheng, Ee Meng, Dr.; Gibson, A. G. (Trans Tech Publications, 2013)This paper describes the modeling of multiaxial ultimate elastic wall stress (UEWS) at room temperature for glass fibre reinforced epoxy (GRE) composite pipes. The model developed, predicts the stress-strain response caused ... -
Motorbike engine faults diagnosing system using neural network
Paulraj, Murugesa Pandiyan, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Sazali, Yaacob, Prof. Dr.; Zin, M.Z.M. (IEEE Conference Publications, 2008-12)Monitoring systems for motorbike industry requires high and efficient degree of performance. In recent years, automatic identification and diagnosis of motorbike engine faults has become a very complex and critical task. ... -
Numerical stress analysis of epoxy adhesively bonded dissimilar joint
Nur Athirah, Mat Nawi; A.R. Abdullah; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Haftirman, Idrus, Dr. (Trans Tech Publications, 2014)A two-dimensional adhesively bonded dissimilar single lap joint model was analyzed under tension. An explicit closed-form solution was formulated by using MATLAB tool for analysis of shear and peel stresses distribution ... -
Qualification and lifetime modelling of fibreglass pipe
Gibson, Arthur Geoff; Mohd Shukry, Abdul Majid, Dr.; Assaleh, T. A.; Hale, Jack Michael; Fahrer, A.; Rookus, C. A P; Hekman, M. (Maney Publishing, 2011-03)Procedures for qualifying fibreglass pipes are discussed here in relation to industry needs. The ultimate elastic wall stress (UEWS) test appears to provide an efficient means of rating pressure pipe, and indeed vessels, ... -
Short-term test of ±55 filament wound GRE composite pipes under multiaxial stress ratios
Krishnan, Pranesh; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Haslan Fadli, Marzuki; Mohd Nor Fakhzan, Mohd Kazim (Trans Tech Publications, 2014-06)This paper discusses the the development of an automated pressure testing rig to perform a short term test; Ultimate Elastic Wall Stress (UEWS) for ±55˚ glass fibre reinforced epoxy (GRE) composite pipe under various stress ... -
Steel plate damage diagnosis using probabilistic neural network
Paulraj, Murugesa Pandiyan, Prof. Dr.; Sazali, Yaacob, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Krishnan, Pranesh (IEEE Conference Publications, 2013-01)This paper discusses the application of frame energy based DFT spectral band features for the detection of damages in steel plates. A simple experimental model is devised to suspend the steel plates in a free-free condition. ... -
Strength of ductile adhesive butt joint bonded with dissimilar adherents: effect of surface roughness
Nurul Atikah; Mohd Afendi, Rojan, Dr.; Siti Hirmaliza; Mohd Shukry, Abdul Majid, Dr.; Nurul Amira; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-06)The purpose of this project is to study the influence of the macroscopic state of surface roughness of the dissimilar adherent on the strength of adhesive joint. In this project, several types of sandpaper were used to ...