Show simple item record

dc.contributor.authorMohd Mustafa Al-Bakri, Abdullah
dc.contributor.authorLiyana, Jamaludin
dc.contributor.authorKamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.
dc.contributor.authorMohamed, Bnhussain, Prof. Dr.
dc.contributor.authorChe Mohd Ruzaidi, Ghazali, Prof. Madya
dc.contributor.authorMohd Izzat, Ahmad
dc.date.accessioned2014-03-10T08:53:08Z
dc.date.available2014-03-10T08:53:08Z
dc.date.issued2013
dc.identifier.citationAdvanced Materials Research, vol. 686, 2013, pages 227-233en_US
dc.identifier.isbn978-303785658-1
dc.identifier.issn1022-6680
dc.identifier.urihttp://www.scientific.net/AMR.686.227
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/32486
dc.descriptionLink to publisher's homepage at http://www.ttp.net/en_US
dc.description.abstractGeopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has been applied as protective coating material that suitable for high temperature applications such as fire resistant panel. Geopolymer coating samples were cured at 70 °C for 24 hours before sintered using temperatures range from 600 °C to 1500 °C in order to increase strength and improve thermal properties. Curing conditions also have a significant effect on the development of mechanical strength in most cementitious systems. The chemical compositions, microstructure and FTIR were studied. Geopolymer coating samples cures to a glassy texture and effectively used to create a resistant surface. Fly ash geopolymer coating was improved the compressive strength of the coatings materials as high as 40 MPa. This technology develop a geopolymeric mix design that superior use as cementitious coatings with high thermal applicationen_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectCoating materialen_US
dc.subjectFTIRen_US
dc.subjectGeopolymeren_US
dc.titleStudy on fly ash based geopolymer for coating applicationsen_US
dc.typeArticleen_US
dc.contributor.urlmustafa_albakri@unimap.edu.myen_US
dc.contributor.urlliyanajamaludin@unimap.edu.myen_US
dc.contributor.urlvc@unimap.edu.myen_US
dc.contributor.urlbnhusain@kacst.edu.saen_US
dc.contributor.urlruzaidi@unimap.edu.myen_US
dc.contributor.urlizzatahmad@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record