Design resonant transformer
Abstract
This project aims to design a resonant transformer. A resonant transformer is basically an electromagnetic static equipment based on the principle of Faraday’s law of electromagnetic induction that can be generate high alternating voltages and current. Due to resonance, a very high voltage can develop across the secondary, until it is limited by some process such as electrical breakdown. Based on knowledge of basic principle of transformer, that rated capacity of resonant transformer is design with 2.0KVA. The winding of transformer is 182 primary turns and 3636 secondary turns respectively. It designed as 100V of primary voltage and 2000V of secondary voltage. The resonant coil, usually the secondary, acts as an inductor, and are connected in series with a capacitor. When the primary coil is driven by a periodic source of alternating current, such as a square or wave at the resonant frequency, each pulse of current helps to build up an oscillation in the secondary coil.
Collections
Related items
Showing items related by title, author, creator and subject.
-
ETP first year achievement
Prime Minister's Department (Prime Minister's Department, MalaysiaPerformance Management and Delivery Unit (PEMANDU), 2012) -
Investigation the effect of secondary burden of current transformer (CT)
Siti Zaharah, Saud (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)Current Transformers (CT’s) are instrument transformers that are used to supply a reduced value of current to meters, protective relays, and other instruments. CT’s provide isolation from the high voltage primary, permit ... -
Comparison on losses and flux distribution among three 3-phase distribution transformers 1000kVA assembled from various amount of layers per stack of transformers core lamination
Ismail, Daut; Dina Maizana, Maiz Ahmad; Shuhaimi, Zakaria; Soib, Taib (Universiti Kuala Lumpur (UniKL), 2007-12-13)This paper describes the results of an investigarion on the effect of different amount of layers per stack of core lamination in the three of 3 phase distribution transformers 1000kVA. The investigation involves the variant ...