Search
Now showing items 61-66 of 66
Effect of Al2O3/ZrO2 reinforcement on the mechanical properties of PMMA denture base
(Universiti Malaysia Perlis, 2010-06-09)
Study on the properties of denture base materials made from PMMA filled with Al2O3/ZrO2 was carried out.
The amount of Al2O3/ZrO2 filler was fixed at 5 wt%. However, the ratio of Al2O3 to ZrO2 added was from 0 to 100.
Samples ...
Crystallite size of chitosan capped zinc sulfide nanoparticles synthesized via wet chemical route
(Universiti Malaysia Perlis, 2010-06-09)
The effect of chitosan capping
agent on the ZnS nanoparticles synthesized via
wet chemical route was studied. The used of
chitosan as a capping agent for ZnS
nanoparticles had allow the synthesis to be
carried out in ...
Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering
(Universiti Malaysia Perlis, 2010-06-09)
This research was carried out to fabricate and
characterize Co-Cr-Mo (F-75) alloy. The
samples have been prepared via solid state
sintering. The powders were supplied by
Sandvik Osprey Ltd, UK and special design ...
Deposition of some transparent conducting oxide thin films by a simple spray pyrolysis technique and their characterizations for optoelectronic applications
(Universiti Malaysia Perlis, 2010-06-09)
In this study, spray pyrolysis method has
been employed for the deposition of
some transparent oxide thin films like
ZnO, CdO and SnO2 onto glass substrate
under atmospheric pressure using zinc
acetate, cadmium acetate ...
Effect of calcination temperatures on the Ba(Zn1/3Ta2/3)O3 phase formation
(Universiti Malaysia Perlis, 2010-06-09)
Nowadays, high dielectric materials are
important materials in microwave electronic
applications due to its properties that can
provide high frequency range of an antenna.
Barium Zinc Tantalate (BZT) is a complex
perovskite ...
Comparison of using regression and fundamental paramenter methods in the EDXRF analysis of hazardous elements
(Universiti Malaysia Perlis, 2010-06-09)
The study used EDXRF technique to
determine the concentrations of
hazardous elements such as lead,
chromium, mercury, bromine and
cadmium. Quantitative analysis of these
elements was done by using the
Regression and ...