Search
Now showing items 1-10 of 38
Design of planar meander line antenna
(Institute of Electrical and Electronics Engineering (IEEE), 2009-03-23)
Meander line antenna (MLA) have been designed to operate at 2.4-GHz for WLAN application. Two different designs of meander line antenna are investigated, using conductor line and parasitic. Microwave Office software and ...
Miniaturization and broadbanding techniques for folded meander line microstrip antennas
(Institute of Electrical and Electronics Engineering (IEEE), 2009)
In this paper a Folded Meander Line Antenna (FMLA) had been designed to operate in WLAN b/g band. Fabricated on a FR-4 board for single layer prototype and RO3010 for two layers prototype. The design of this antenna is ...
Effect on source signal condition for pyramidal microwave absorber performance
(Institute of Electrical and Electronics Engineers (IEEE), 2010-05-11)
In designing a microwave absorber for anechoic chamber, there are many condition can affect the performance of microwave absorber. In this work, four conditions are discussed to compare the reflectivity or S11 of the ...
A review of wearable antenna
(Institute of Electrical and Elctronics Engineering (IEEE), 2009-12-08)
Utilization of wearable textiles in the antenna segment has been seen on the rise due to the recent miniaturization of wireless devices. A wearable antenna is meant to be a part of the clothing used for communication ...
A review of wearable antenna
(Institute of Electrical and Electronics Engineers (IEEE), 2009-11-16)
Utilization of wearable textiles in the antenna segment has been seen on the rise due to the recent miniaturization of wireless devices. A wearable antenna is meant to be a part of the clothing used for communication ...
Design of single layered circular and rectangular U-slotted, CPW-fed antennas and arrays for RFID applications
(Institute of Electrical and Electronics Engineers (IEEE), 2010-05-26)
This work describes the design of high gain, U-slot antennas for RFID 915 MHz (902-
928 MHz) applications. Four types of antenna were designed, optimized and evaluated -
a circular, U-slotted antenna, a rectangular ...
A development of fractal PIFA (Planar Inverted F Antenna) with bandwidth enhancement for mobile phone applications
(Institute of Electrical and Electronics Engineers (IEEE), 2009-11-16)
A novel Fractal planar inverted F antenna (F-PIFA) based on the self affinity design is presented in this paper. The procedure for designing a Fractal Planar Inverted F Antenna is explained and the 2nd iteration of Sierpinski ...
125 KHz ubiquitous RFID tag signal detector system
(Institute of Electrical and Electronics Engineers (IEEE), 2007-11-25)
This paper presents a development of 125 KHz ubiquitous RFID tag signal detector system that can be used as a door lock for home security. The RFID tag signal detector or also known as RFID reader consists of three elements ...
Simplified Modeling, Simulation and Performance Analysis Using Circuit Model for a Corporate Feed Microstrip Patch Array
(Institute of Electrical and Electronics Engineers (IEEE), 2007-03-27)
This work is an effort in investigating and modeling an accurate circuit model derived from the transmission line method (CM/TLM) by simulating a rectangular microstrip patch array using two different simulation techniques, ...
Performance comparison of serial and corporate feeding networks in a rectangular Microstrip patch antenna array
(Kolej Universiti Teknologi Tun Hussein Onn, 2006-12-19)
One of the important aspects of a microstrip patch antenna array is the availability of the two feeding networks applicable to them, which are the serial and corporate feeding. A good impedance matching and optimal radiation ...