Search
Now showing items 11-19 of 19
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Alteration in the microstructure of fly ash geopolymer upon exposure to elevated temperatures
(Trans Tech Publications, 2013)
This paper represents the mechanical and microstructure changes in geopolymeric material synthesized by the alkali activation of locally source fly ash at high temperatures of 400, 600 and 800 °C. The high compressive ...
Strength of concrete with ceramic waste and quarry dust as aggregates
(Trans Tech Publications, 2013)
This research focuses on a study of the strength of concrete with ceramic waste as coarse aggregate and quarry dust as fine aggregate. The sources of ceramic waste and quarry dust are obtained from the industrial in Malaysia. ...
Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers
(Elsevier Ltd., 2012-10)
Kaolin and alkali activator were mixed with the solids-to-liquid ratios in range of 0.60-1.20 (Al 2O 3/Na 2O molar ratio of 0.63-1.27). Sodium silicate and sodium hydroxide ranged between 0.16 and 0.36 (SiO 2/Na 2O molar ...
Effect of mechanical activation on kaolin-based geopolymers
(Trans Tech Publications, 2012)
Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...
Curing Behavior on kaolin-based geopolymers
(Trans Tech Publications, Switzerland., 2012)
This paper aims at investigating the influence of curing process on kaolin-based geopolymers. Kaolin-based geopolymers were prepared by the alkali-activation of kaolin with alkali activating solution (mixture of NaOH and ...
Study of concrete using modified polystyrene coarse aggregate
(Trans Tech Publications, 2013)
Polymer recycling has received a great deal of attention in recent years. At the present time, small percentages of polymer wastes in Malaysia are being recycled. The recycling process has typically consisted of reprocessing ...
Design, processing and characterization of fly ash-based geopolymers for lightweight concrete application
(Institute for Scientific Information (ISI), 2013-04)
The mix design of geopolymers plays important role in obtaining desirable compressive strength. Optimum mix design of geopolymers can be applied for application, such as lightweight concrete. In order to determine the ...
Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature
(Trans Tech Publications, 2013)
Fly ash-based geopolymers are new binding materials produced to replace the ordinary Portland cement (OPC) used in concrete. In this research, the effect of alkaline activators on the compressive strength and the microstructure ...