Now showing items 1-20 of 50

    • An Undergraduate Micro Fabrication Course at the Northern Malaysia University College of Engineering 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
      This paper presents the development of a new course conducted by the School of Microelectronic Engineering at the Northern Malaysia University College of Engineering or Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM) ...
    • Educational collaborations with Thai universities: the case of KUKUM 

      Zuraidah, Mohd Zain; Zul Azhar, Zahid Jamal; Ali Yeon, Md Shakaff (Hatyai University (HU), 2004-08-27)
      With increasing population and limited resources, numerous factions in the world today compete hard with one another. In accordance to Darwin’s ‘survival of the fittest’, only the strongest and loudest endure. Against this ...
    • The application of Nitride semiconductor materials 

      Yam, Fong Kwong; Zul Azhar, Zahid Jamal, Prof. Dr.; Zainuriah, Hassan (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-12)
    • Techniques in Integrated Circuit (IC) failure analysis 

      Zul Azhar, Zahid Jamal, Assoc. Prof. Dr.; Sanna, Taking (ELectron Microscopy Society of Malaysia (EMSM), 2004-12-13)
      Failure analysis (FA) plays an important role in the development and manufacturing of integrated circuits. It provides necessary information for technology advancement and for corrective action to improve quality ...
    • Cost Effective Negative Plenum Cleanroom for Microelectronic Engineering undergraduate 

      Uda, Hashim; Zul Azhar, Zahid Jamal; Mohammad Nuzaihan, Md Nor; Nur Hamidah, Abdul Halim (Kolej Universiti Kejuruteraan Utara Malaysia, 2005)
      The Negative Plenum Cleanroom which is design and built by KUKUM is primarily used for the teaching of the undergraduate microelectronic course. The cleanroom is approximately 115m² in size. The level of cleanliness in the ...
    • Sistem K-Kedatangan di Kampus Teragih 

      Kamarudin Hussin; Nasrudin Abd. Shukor; Nor Shubaily Khamis; Mohd Noorulfakri Yaacob (Kolej Universiti Kejuruteraan Utara Malaysia, 2005)
      K-Kedatangan merupakan sistem yang digunakan untuk merekod kehadiran kakitangan di kampus KUKUM. Sistem ini menggunakan teknologi kad pintar yang menggabungkan dua sistem utama iaitu lUS-Staf dan NPower. Sistem K-Kedatangan ...
    • A cost effective and consummate fabrication teaching set up for microelectronic engineering undergraduate 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Mohammad Nuzaihan, Md Nor (Malaysian Invention & Design Society (MINDS), 2005-05-19)
      The package, which is fully designed and developed using KUKUM in-house expertise, is the first teaching laboratory that is purposely built for undergraduate microelectronic program in Malaysia.
    • MOSFET Technology for Microelectronic Engineering Undergraduate Programme 

      Zul Azhar, Zahid Jamal, Prof. Dr.; Uda, Hashim, Prof. Dr.; Nur Hamidah, Abdul Halim; Mohammad Nuzaihan, Md Nor (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      This project focused on the process development of MOSFET fabrication. Microelectronic fabrication equipment and facilities from the micro fabrication cleanroom laboratory in KUKUM were used for the purposes of this project. ...
    • KUKUM Artificial Marble 

      Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Mohd. Nazry, Salleh; Mohd. Sobri, Idris (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      KUKUM artificial marble can be processed as one-piece structure, so it can eliminates the problem of assembly by providing a one piece solution.
    • A Cost Effective Negative Plenum Cleanroom for Microelectronic Engineering Undergraduate Programme 

      Uda, Hashim, Prof. Madya Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Nur Hamidah, Abdul Halim; Mohammad Nuzaihan, Md Nor (Kementerian Pengajian Tinggi Malaysia (KPTM), 2005-09-30)
      To design and build a microelectronic cleanroom which is compatible to other commercially installed clenroom for the purpose of teaching undergraduate and postgraduate students in the field of microelectronic fabrication.
    • A new Microelectronic Engineering degree curriculum in KUKUM 

      Yufridin, Wahab; Ali Yeon, Md Shakaff; Zul Azhar, Zahid Jamal; Zuraidah, Mohd Zain; Reha, Abdul Razak; Uda, Hashim (Association of Engineering Education in South East Asia and the Pacific, 2005-12-08)
      This paper presents the development and implementation of a new curriculum at the Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM). The curriculum is specifically developed for the Bachelor of Engineering Degree program ...
    • Affordable and Effective Microelectronic Engineering Teaching Package for Undergraduate Programme 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Nur Hamidah, Abdul Halim; Mohammad Nuzaihan, Md Nor (International Exhibition of Inventions, 2006-04-05)
      The package, which is fully designed developed, using KUKUM in house expertise, is the first teaching laboratory that is purposely built for undergraduate microelectronic program in Malaysia.
    • MOS Transistor (Fabricated Using In-House Low Cost Facilities) 

      Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Nur Hamidah, Abdul Halim; Mohammadd Nuzaihan, Mohd Nor; Mohd Sallehudin, Saad; Phang, Keng Chew; Haffiz, Abd Razak; Bahari, Man (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      MOS Transistor is divided into two types: NMOS and PMOS. Majority carrier od NMOS is electrons whereby PMOS is holes. The MOS transistor consists of three regions namely source, drain and gate. Fabrication of MOS transistor ...
    • MOS Transistor Mask Design Using SEM Based E-Beam Lithography 

      Uda, Hashim, Prof. Dr.; Nur Hamidah, Abdul Halim; Mohammad Nuzaihan, Md Nor; Zul Azhar, Zahid Jamal, Prof. Dr. (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Electron beam lithography (EBL) is one of the alternative tools in transferring micro and nano circuit patterns from design editor to the substrate. EBL is state-of-the-art technology for micro and even to nano feature ...
    • Growth of GaN quantum dots using [(C2H5)4]Si by plasma assisted MOCVD 

      Arsyad, F. S.; Subagio, A.; Sutanto, H.; Arifin, P.; Budiman, M.; Barmawi, M.; Husien, I.; Zul Azhar, Zahid Jamal (Institute of Electrical and Electronics Engineering (IEEE), 2006-07)
      Growth of GaN quantum dots on AlGaN layer using [(C2H 5)4]Si [TESi] by plasma assisted metal organic chemical vapor deposition (PA-MOCVD) is reported. The surface profile of the grown GaN quantum dot was determined by ...
    • KUKUM as an agent and role model in disaster preparedness and disaster management vis-à-vis the Malaysian Mechanism of Disaster Management 

      Azuddin, Bahari, Lt Kol (B); Zul Azhar, Zahid Jamal, Assoc. Prof Dr.; Kamarudin, Hussin, Lt Kol Prof Dato' (International University, 2006-12-07)
      KUKUM’s experience in contributing to the local community, functioning alongside the machineries of the Perlis State Government during the recent flood disaster is described at length in this paper. There was a continuous ...
    • Designing of masks for quantum dot single electron transistor fabrication using E-beam nanolithography 

      Uda, Hashim; Sutikno, Madnasri; Zul Azhar, Zahid Jamal (Nano Science and Technology Institute, 2007)
      Quantum dot single electron transistor (QD SET) is able to be fabricated through a joint technique of e-beam lithography (EBL), pattern dependent oxidation (PADOX) and high density plasma etching. In this research, we have ...
    • A simple oxidation technique for quantum dot dimension shrinkage and tunnel barriers generation 

      Madnarski Sutikno; Uda, Hashim, Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr. (Elsevier B.V., 2007-05)
      The tunnel barriers generation and the quantum dot size shrinkage play a significant role in single-electron transistor (SET) fabrication. Because the numerically etch indicators were not found, the technical indicators, ...
    • Development of a PMV-based thermal comfort modelling 

      Shazmin Aniza, Abdul Shukor; Karl Kohlhof; Zul Azhar, Zahid Jamal (International Association of Science and Technology for Development (IASTED)/ACTA Press, 2007-05)
      This paper concentrates on the modelling development for a PMV-based thermal comfort system. Operators can define their own expression towards the surroundings by inserting the respective value of PMV and the system will ...
    • Development of Barium Strontium Titanate (BST) Based Sensor/ Instruments 

      Johari, Adnan, Assoc. Prof. Dr.; Zul Azhar, Zahid Jamal, Prof. Dr.; Irzaman Sulaiman, Hussain, Dr.; Sanna, Taking; Mohd Asri, Idris; Nurjuliana, Juhari; Norhayati, Sabani (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      The research project deals with the development of BST based microsensors/instruments such as optical, heat and gas sensors/instruments.