Search
Now showing items 11-20 of 28
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)
Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)
Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
The outcome of sintering parameters study toward the thermal properties of CuSiC composite
(Trans Tech Publications, 2014)
Miniaturisation of electronic chips which have increasing functionality within the same package size has induced significant increases in requirements for extraction of heat from the integrated circuit (IC). Packaging ...
Effect of space holder and compaction pressure on the porosity of sintered copper
(Trans Tech Publications, 2013)
The effect of space-holder content on the porosity of sintered copper that was fabricated by powder metallurgy technique has been investigated. Carbamide was used as space-holder and the content selected was 10 wt. %, 20 ...
Development and characterization of Co-Cr-Mo (F-75 alloy)/hydroxyapatite composites fabricated by powder metallurgy for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2013)
Co-Cr-Mo (F-75) alloy is known to be used in biomedical field because of their excellent biocompatibility when implanted to human or animal body. Hydroxyapatite (HAP) powders have been used as filler because HAP is the one ...
Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles
(Trans Tech Publications, 2014-01)
Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ...
Characterization of PM Fe-Cr-Y₂O₃ composites prepared by microwave sintering technology
(Trans Tech Publications, 2014-01)
This research is focused on assessing the feasibility of the new and innovative microwave sintering technology for fabricating iron-chromium composites prepared via powder metallurgy route. Accordingly, the microwave ...
Non-metal reinforced lead-free composite solder fabrication methods and its reinforcing effects to the suppression of intermetallic formation: short review
(Trans Tech Publications, 2013)
To increase the solder joint robustness, researches and studies on composite solder carried out by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders. ...
Synthesis and characterization of pure magnesium/bio-glass composite
(Trans Tech Publications, 2013)
In this study, bio-glass 45S5 powder was added to pure magnesium powder to produce the magnesium/bio-glass composite by powder metallurgy method. The composite was synthesized based on 5 wt. %, 10 wt. % and 15 wt. % of ...
Synthesis and characterization of iron produced from iron mill scale
(Trans Tech Publications, 2014-01)
In this project, iron mill scale has been used to produce iron powder that can be used within the Powder Metallurgy process. To achieve this objective, the iron mill scale needs to be refined. This involve the work of ...