Search
Now showing items 11-20 of 29
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Particle size – dependent on the static and dynamic compression properties of polypropylene/silica composites
(Elsevier, 2013-03)
The effect of particle size is widely known as an essential factor that influences the mechanical properties of particulate filled polymer composites. However, there is a limited number of works available, on the particular ...
Comparison of processing and mechanical properties of polypropylene/recycled acrylonitrile butadiene rubber/rice husk powder composites modified with silane and acetic anhydride compound
(SAGE Publications Ltd, 2014-12)
Polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr)/rice husk powder (RHP) composites were fabricated with silane and acetic anhydride (Ac) treatment agent. The in situ formed RHP-filled PP/NBRr composites ...
Innovative Metal injection molding (MIM) method for producing CoCrMo alloy metallic prosthesis for orthopedic applications
(Trans Tech Publications, 2014-01)
Powder injection molding (PIM) is a powder metallurgy process currently used for the production of complicated and near net shape parts of high performance materials [. This technique basically combines the advantages of ...
Mechanical, morphological and thermal properties of chitosan filled polypropylene composites: The effect of binary modifying agents
(Elsevier B.V., 2013)
This work investigates the effects of the binary modifying agents-organosolv lignin and acrylic acid, on the mechanical and thermal properties of chitosan-filled polypropylene (PP) composites. We analyse the mechanical and ...
Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si 3N4 novel lead-free nanocomposite solder
(Trans Tech Publications, 2011-07-04)
A nanocomposite solder alloy with 99.3Sn-0.7Cu base alloy was successfully fabricated using the powder metallurgy route which consists of blending, compaction and sintering. Varying amount of nano size silicon nitride ...
Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler
(Wiley Periodicals, Inc., 2011-03-05)
Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading ...
Recycled copper as the conductive filler in polyester composites
(Universiti Teknologi Malaysia, 2011-03)
In this study, the effect of recycled copper on the electrical, mechanical and
thermal stability properties of the polyester composites was investigated. Electrical
conductivity results revealed that increasing in ...
Measurement on strain rate sensitivity and dynamic mechanical properties of various polymeric materials
(Trans Tech Publications, 2011)
Strain rate sensitivity and dynamic mechanical properties of polymeric materials are affected to a certain extent especially by the rate of loading. However, there is limited number of works reported on that particular ...
The effect of waste office white paper content and size on the mechanical and thermal properties of low-density polyethylene (LDPE) composites
(Taylor & Francis, 2010-01-07)
The effect of waste office white paper (WOWP) loading and size on mechanical properties, morphology and thermal properties of LDPE/WOWP composites were investigated. The results showed that increasing of WOWP loading has ...