Browsing Journal Articles by Subject "Corrosion"
Now showing items 1-20 of 20
-
Comparative study of corrosion behavior of AA2014/15 Vol%Al2O3p and AA2009/20 Vol% SiCw
(Portuguese Electrochemical Society, 2008)The influence of heat treatment on the corrosion behavior of two aluminium matrix composites (AA2014/15 vol% Al2O3p - composite A and AA2009/20 vol% SiCw - composite B) was analyzed in 3.5% sodium chloride solution. The ... -
Corrosion behaviour of aluminium alloy treated with vegetable and mineral oil lubricationts in NaCI medium
(Oriental Science Publishing Co, 2004-07-30)The inhibitive effect of vegetable oil and mineral oil on the corrosion of aluminum alloy has been studied at 60°C in 8%(w/v) and 10%(w/v) NaCI solution by mass change method. The effect of NaCI concentration and time of ... -
Corrosion behaviour of copper in various grades of palm oil
(Carl Hanser Verlag, 2008) -
Corrosion in petroleum and petrochemical industries
(University College of Science and Technology TerengganuFaculty of Science and Technology, 2000)Corrosion is the destructive result of chemical reaction between a metal or metal alloy and its environment. Metal atoms in nature are present as chemical compounds. The same amounts of energy needed to extract metals ... -
Corrosion performance of reinforcement bar in geopolymer concrete compare with its performance in ordinary portland cement concrete: A short review
(Trans Tech Publications, 2013)Since decades ago, corrosion is the crucial factors for million dollars loss in construction industry. Corrosion of reinforcement bar in ordinary Portland cement (OPC) concrete is mainly due to chloride and acid attack and ... -
The CsCl- and CsN03-induced high temperature oxidation of Nimonic-90 alloy at 1123 K
(Elsevier Science B.V., 1996)Nickel-base alloys find vital scope in space and nuclear applications due to their numerous favourable properties such as low density, high strength and corrosion resistance. The high temperature oxidation of Nimonic-90 ... -
Effect of Inhibitors on the Corrosion of AISI-1018 Steel in Sea-Water Environment
(Research India Publications, 2008)The inhibitive properties of sodium benzoate for AISI-1018 steel controlling corrosion were studied in seawater environment at atmospheric condition. Three sets of solution were prepared with the concentrations of 0.3M, ... -
Ferrous base materials performance in seawater and its failure analysis
(Kolej Universiti Sains dan Teknologi MalaysiaFakulti Sains dan Teknologi, 2004)The effect of seawater to the corrosion behavior of ferrous base steel AISI 1053 have been determined at room temperature. The corrosion products were characterized by using energy-dispersed X-ray spectroscopy (EDS), and ... -
High temperature corrosion behaviour of steel with a Carbonate deposit at 1123K
(School of Materials Engineering, 2007)The high temperature corrosion behavior of A1S1 304 austenitic stainless steel and S45C carbon steel were studied in presence with CaCO3 salt at 1123K for 24,48,72, 96 and 120 hour. The studies were carried out to determine ... -
Hot corrosion behaviour of Austenitic Steel-308 in Chloride salts
(School of Materials Engineering, 2008)The intensification of process engineering in almost every branch of modern technology, and development of new technologies make increasingly higher requirements for metallic construction materials, especially for their ... -
Hot corrosion behaviour of Inconel-600 alloy in presence of NaCI and Na2CO3 at 850°C
(Carl Hanser Verlag, 1993) -
Hot corrosion behaviour of Nickel-200 alloy in presence of Sodium salts at 850°C
(Academy Science Publishers/African Academy of Sciences (AAS)Faculty of Science, University of Maiduguri, Nigeria, 1996)The hot corrosion behaviour of Nickel-200 industrial alloy has been investigated in presence of Na2S04, NaCI, NaN03, Na2C03 and Na202 at 850°C in flowing air. The hot corrosion kinetic and effect of salt deposition on the ... -
The KNO3- and K2Co3-Induced hot corrosion behaviour of M-21 alloy at 900°C
(Carl Hanser Verlag, 1995) -
Oxidation behavior of SAE-1053 alloy in presence of seawater
(INSInet Publication, 2009-01)The oxidation behavior of steel SAE-1053 alloy were investigated in presence of seawater at atmospheric condition. The rate of corrosion was varied with the water movements and the aeration. The scale morphologies were ... -
Oxidation behaviour of 8.6 Al-Cu alloy in South China Seawater
(Sadguru PublicationsFaculty of Science and Technology, University College of Science and Technology Malaysia, 2005)The corrosion behavior of 8.6 Al-Cu alloy was investigated in 4 different conditions of South China Seawater. The weight loss curve of alloy increases with time during the initial exposure period, due to dissolution of ... -
Oxidation behaviour of AISI-304 steel in the presence of Na2S04 and Fe2(S04)3 at 973 K
(Elsevier Science B.V., 1994)The high temperature oxidation behaviour of AISI-304 austenitic steel was studied in the presence of Na2S04, Fe2(S04)3 or a mixture at 973 K in flowing air. The studies were carried out to examine the influence of eutectic ... -
Oxidation behaviour of low carbon steel in natural water
(Oriental Science Publishing CoFaculty of Science and Technology, University College of Science and Technology Malaysia, 2002)Natural water pollution has been identified as a potential danger to metallic materials used under service conditions. Sea water and lake water foulants have adequate corrosive environment due to chemical ingredients ... -
Response of functionality graded hydroxyapatite/F-75 in saline solution 0.9% NaCl
(Trans Tech Publications, 2013)Functionally graded hydroxyapatite (HAP) /F-75 was fabricated using powder metallurgy technique. Samples fabricated were tested inside 0.9% NaCl to check their bioactivity reaction. After immersed, samples were analyzed ... -
Reviews on the Geopolymer materials for coating application
(Scientific.Net, 2012-12)The application of geopolymer has been expand in many areas where before this it only used for the production of cement and concrete. One of the new applications of geopolymer is for coating. Metakaolin, fly ash and ... -
The role of Sodium Benzoate in controlling corrosion of stainless steel in seawater environment
(University College of Science and Technology Malaysia, 2003)The controlling corrosion of stainless steel has been investigated under the sea water environment. The aim of this study is to prevent the stainless steel from corrosion by using sodium benzoate as inhibitor. Three set ...