School of Materials Engineering (FYP): Recent submissions
Now showing items 41-60 of 338
-
The study on zinc sacrificial anodes as an external galvanic cell in the underground cathodic protection system
(Universiti Malaysia Perlis (UniMAP), 2017-05)The study additional external galvanic cell in the sacrificial anode cathodic protection system in the protection for buried steel from corrosion has been performed. The exposed area of protected steel 1cm2 and it was ... -
The study of aluminium sacrificial anode as an external galvanic cell in the underground cathodic protection system
(Universiti Malaysia Perlis (UniMAP), 2017-04)The focus of this study is to determine the effectiveness of external galvanic cell as an addition power supply in the sacrificial anode cathodic system. A unit in an external galvanic cell has a cell consisting of sacrificial ... -
A study on Nickel plating onto Stanum oxide by electroless plating method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Currently, stanum oxide (SnO) materials are vigorously investigated due to its potential electronic properties. In most cases SnO layers synthesized by a typical potentiostatic anodization exhibit a characteristic stacked ... -
The effect of compaction on Co-HA mechanical properties
(Universiti Malaysia Perlis (UniMAP), 2017-05)This project conducted to study the effect of compaction of Co-HA on mechanical properties. Cobalt is actively involved in the metabolic process of body such as it promotes the growth of bone tissues and increases the ... -
Optimisation of resistance spot welding process parameters on mild steel by Taguchi method
(Universiti Malaysia Perlis (UniMAP), 2017-06)The paper represents experimental to investigate in studying the optimisation of resistance spot welding process parameters by using taguchi method. The mild steel was selected in this project. The process parameters such ... -
The effect of aluminium content on the bioactivity behaviour of biodegradable magnesium alloys for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2017-05)Magnesium and its alloy has become the most promising candidate to substitute the conventional biomaterial such as stainless steel, cobalt chromium and titanium nowadays. Its tremendous mechanical properties such as ... -
Thermal aging of Poly (Methyl Methacrylate) composites filled with natural filler
(Universiti Malaysia Perlis (UniMAP), 2017-06)Poly (Methyl Methacrylate)/Palm Kernel Shell (PKS) composites by using Dichloromethane (DCM) as solvent was prepared by solvent casting technique at room termperature. The process started with sieve PKS and dried out ... -
The bioactivity behavior of Magnesium Alloys (AZ91) reinforced with HAP (composite) used for biomedical applications
(Universiti Malaysia Perlis (UniMAP), 2017-04)The aim of this research is to evaluate the effect of hydroxyapatite (HAP) particles content on bioactivity behavior of a composite AZ91/HAP. Novel AZ91 with (0, 3 wt%, 6wt% and 9wt% of HAP) composites were fabricated using ... -
Effect of graphene oxide on electrical conductivity, bandgap and sensing properties of Chitosan-Poly(vinyl) alcohol films
(Universiti Malaysia Perlis (UniMAP), 2016-12)In this study, chitosan-polyvinyl alcohol-graphene oxide matrix films were prepared to observe the effect of graphene oxide volume (5mL, 10mL, 15mL, 20mL and 25mL) in microstructure, electrical conductivity, band gap and ... -
Shape memory foam produced by an aqueous emulsifying technique
(Universiti Malaysia Perlis (UniMAP), 2017-06)Shape memory polymeric foam able to change from its secondary shape (memorized by polymer) back to its original shape when it is applied by external stimulus. Fabrication technique decides the morphology and properties of ... -
Dynamic mechanical analysis on palm waste filled recycled thermoplastic composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)The aim of this research is to investigate Dynamic Mechanical Analysis (DMA) on palm waste filled HDPE composite and recycled HDPE composite respectively. Basically, palm ash and palm slag were grinded and sieved to obtain ... -
The influence of co-precipitation and green synthesis of ginger, onion and lemon on the properties of iron oxide nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-04)Iron oxide nanoparticles (IONPs) were synthesized by two different methods, coprecipitation and green synthesis. Onion, lemon and ginger extracts were used as the natural reducing agent in the green synthesis of IONPs ... -
Palm oil based Polyol (POBP) as diluent in epoxy-polyamide / silica composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research carried out to prepare and study epoxy-polyamide curing system modified with palm oil based polyol (POBP) and silica as filler. The system is investigated using five different ratios of POBP (0, 5, 10, 15, ... -
A study of zinc electroplating process on mild steel for seawater application
(Universiti Malaysia Perlis (UniMAP), 2017-04)The study of zinc (Zn) electroplating process on mild steel (Fe) for seawater application was carried out under the combined action of electroplating and seawater application, 3.5 wt% NaCl solution. The purpose was to study ... -
Effect of different particle and mercerization content on properties of recycled low density Polyethylene/peanut husk biocomposites
(Universiti Malaysia Perlis (UniMAP), 2017-04)This research is focused on the utilization of peanut husk (PH) as a fillers with recycled low density polyethylene (rLDPE) biocomposites. The treated and untreated of biocomposites films of PH and rLDPE with different ... -
The effect of filler loading on palm slag filled thermoplastic composite
(Universiti Malaysia Perlis (UniMAP), 2017-04)This thesis presents the effect of filler loading of palm slag filled thermoplastic composite. Generally, palm slag is waste product from the boiler combustion chamber of the palm oil processing in industry. This waste ... -
Implication of post cure temperature to molded Polyurethane/ Calcium Carbonate foam
(Universiti Malaysia Perlis (UniMAP), 2017-06)Implication of post cure temperature to molded polyurethane foam/calcium carbonate foam was investigated. The polyurethane foam samples were prepared by few steps which was mixing, stirring, curing and post curing into ... -
The effect of ENR as compatibilizer in Epoxy/NR/Graphene in conductive materials
(Universiti Malaysia Perlis (UniMAP), 2017-06)Graphene incorporated with epoxy composite was prepared using mechanical mixing technique with the density, flexural, fracture toughness, electrical conductivity and SEM morphology of the composite were studied. We chose ... -
The influence of co-precipitation and green synthesis of holy basil leaves, blue pea, and oolong tea on the properties of iron oxide nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)Iron oxide nanoparticles (IONPs) are classified according to their size between 1 and 100 nanometers. In this study, IONPs were synthesized by two methods, conventional method which is co-precipitation and green synthesis ... -
Preparation of Ag/TiO₂ thin film by sol-gel method for solar panel application
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research finding was about preparation of Ag/TiO₂ thin fllm by using sol-gel method. Three different parameter was used in this research by using pure titanium, 0.5g of doped silver and 1.0g of dopes silver that coated ...