Search
Now showing items 1-10 of 13
Properties of carbon nanotubes and calcium carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP), 2016-05)
This project was focused on the fabrication and characterization of CNTs-CaCO3 filled
epoxy composites. The polymer composites were prepared with different ratio of filler loading by using a mechanical stirrer with speed ...
The effects of coconut husk fiber versus coconut shell powder in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Thermoplastic polyurethane (TPU) is one of the thermoplastic where can be enhanced the
characteristics by adding filler. TPU have been used in a wide variety of industries fields.
This research describes the effect of ...
Thermal properties of biocomposites based on sea mango fibers
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of sea mango (SM) filler loading and the effect of amount used of polypropylene-graft-maleic anhydride (PP-g-MA) added as a compatibilizer on thermal properties and flow behavior of biocomposites were studied. ...
A potential of corncob powder as filler in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Thermoplastic polyurethane(TPU) have been utilized as a matrix filled with corncob
fibers. Thermoplastic polyurethane have been used in broad assortment industries and
for many purpose like automotive, medical and etc. ...
Development of polymer bio composites utilizing sea shell as filler
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of seashell fillers loading and polypropylene-grafted-maleic anhydride (MA-g-
PP) as a compatibilizer to the physical and mechanical properties were studied. The
compounding of bio-composites was carried out ...
The use of jackruit peel as filler in polylactic acid biocomposite films: effect of filler modification
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The biocomposite films of jackfruit peel filler (JPF) and poly(lactic acid) (PLA) were
prepared by solution casting method. The effect of jackfruit peel filler (JPF) content and modification of JPF by silane coupling agent ...
Optimisation of Z-blade compounding process for enhanced composite performance
(Universiti Malaysia Perlis (UniMAP), 2016-05)
Reinforced materials used in composite are developed by replacing the conventional filler with natural fiber such as sisal, flax, bamboo and banana. This research was carried out to investigate the effect of the compounding ...
Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This research was focused on the effect of sea mango fiber (SMF) content and chemical
modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ...
Influence of surface treatment on the properties of high density polyethylene composites filled with palm kernel shell
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The high density polyethylene (HDPE) composites filled with palm kernel shell
(PKS) were prepared using Z-blade mixer at processing temperature 190 ˚C and rotor
speed 30 rpm. The effect of filler loading of PKS on ...
Mechanical studie of chitosan filled recycled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The chitosan filled recycled low density polyethylene (rLDPE) biocomposites were
prepared by Z-blade mixer at the temperature 180 °C. The effects of chitosan loading on
mechanical properties of the rLDPE/chitosan ...