Search
Now showing items 1-10 of 158
Magnetic properties of Perovskite Oxide, Nd₁-ₓCeₓCoO₃ with different percents of composition where X =0%, 0.25%, 0.50%, and 0.75%
(Universiti Malaysia Perlis (UniMAP), 2016-05)
A Rare-earth cobalt oxide has been widely studied due their interesting
electrical properties and magnetic. The mechanism of electrical conduction and
insulation of the observed transition metals has been reported for ...
The effect of Polyol and Isocyanate ratio to thermal properties of Polyurethane foam
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The effet of polyol and isocyanate ratio to thermal properties of polyurethane foam as thermal analysis were investigated. In this study, the polyol were used is palm oil based polyol type and there a nine ratio were ...
Effect of ratio of ethylene glycol to water and concentration of ammonium fluoride on synthesis of Cu2O nanostructures
(Universiti Malaysia Perlis (UniMAP), 2015-11)
Cuprous oxide (Cu₂O) nanostructures have been synthesized via anodizing process in ethylene glycol electrolyte with different water content and concentration ofNH4F. The effects water content in ethylene glycol electrolyte ...
Study the effect of replacement of fly ashon ordinary portland cement
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The replacement of fly ash in Ordinary Portland cement have been conducted to measure the strength of concrete in different ratio between fly ash and cement. This research is involved three stage like Raw material analysis, ...
Characterization and properties of Citronella Filler Filled Low Density Polyethylene/ Ethylene Propylene Diene Monomer
(Universiti Malaysia Perlis (UniMAP), 2016-05)
Thermoplastic Elastomer (TPE) composite reinforced with cymbopogon nardus,
(citronella filler, CF) was prepared via melt blending method using heated two roll mill at
temperature 160°C, screw rotational speed at 40rpm ...
Synthesis and characterisation of Niobium doped Yttria stabilised Zirconia
(Universiti Malaysia Perlis (UniMAP), 2016-05)
Nb-8YSZ pellets were produced by two different methods – solid state (SS)
processing and sol-gel (SG) synthesis, varying the content of Nb for each of them (0 –1.5% Nb). The Nb-8YSZ pellets were sintered at 1550°C, and ...
Modified waste eggshell for the adsorption of Fe²⁺ from aqueous solution
(Universiti Malaysia Perlis (UniMAP), 2016-06)
In this research, modified waste eggshell was used as adsorbent for Fe (II)
removal. Modified and adsorbed eggshell was characterized by Scanning Electron
Microscopy (SEM), X-ray Fluorescence (XRF), and Brunauer, Emmet, ...
Characterization on the effect of electrospinning parameters on polyacrylonitrile
(Universiti Malaysia Perlis (UniMAP), 2016-05)
This research focuses on characterization on the effect of electrospinning parameters on
polyacrylonitrile (PAN). Polyacrylonitrile (PAN) is used as the main materials in this
research. PAN undergoes electrospinning ...
Direct growth of carbon nanomaterials (CNMs) on stainless steel (effect of surface roughness)
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of surface roughness towards the direct growth of surface roughness on
stainless steel S316 has been investigated. Carbon nanomaterials (CNMs) were grown on
a surface of a stainless steel 316 pellets at the ...
A study on the purification of Limestone
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This research study focused on the purification of limestone by multiple reprecipitation. This study involves the application of different temperature for
carbonation process as to observe the reactiveness of particles ...