Search
Now showing items 31-40 of 41
Properties of Chitosan/Halloysite nanotubes composites films
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Development of polymer bio composite utilizing copra waste as filler
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The morphology and mechanical properties of polypropylene reinforced with copra
waste have been evaluated to establish the possibility of using it as a new material for
engineering applications. The aim of this research ...
Study on static mechanical properties of Linear Low Density Polyethylene (LLDPE) reinforced rice husk (RH)/Sawdust Hybrid composite under various loading rates
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Strain rate effect is a vital factor that seriously affects the mechanical properties of a material under loading conditions. Hence, in this study, static mechanical properties of linear low density polyethylene (LLDPE) ...
Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Kenaf/unsaturated polyester composites were prepared with different kenaf fiber loading (1, 2 and 3 layer) and calcium carbonate loading (1 % and 2 %) by using hand lay –
up method. The kenaf fiber used was in a fiber mat ...
The effect of mechanical properties of sylanized durian husk filled rHDPE biocomposites
(Universiti Malaysia Perlis (UniMAP), 2016-05)
This study focused on the utilization of Durian husk (DH) as natural filler in recycled high density polyethylene (rHDPE) composites. The preparation of both untreated and treated rHDPE/DH biocomposites at different filler ...
Synthesis and characterization of stabilized zirconia toughened alumina (ZTA) doped niobium pentoxide (Nb₂O₅)
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The main target of this research is to study the mechanical properties of the Nb₂O₅ doped with alumina-zirconia composites. Pellets form samples of ZTA (5YSZ) doped
niobium pentoxide in varied amount of 0%, 0.3%, 0.5% ...
Effect of mixing parameter on epoxy composites: mechanical and microscopy analysis
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Effect of mixing speed and mixing time on epoxy/nanoclay composites’ mechanical and morphology properties has been studied in this paper. Fixed amount of nanoclay (3phr) was used to mix by 250 rpm and 500 rpm for 1, 2, 2.5 ...
Studies of blends of natural rubber and styrene-butadiene rubber/citronella fibre composite: the effect of physico-mechanical properties and morphology
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Rubber composite filled with citronella fibre (CF) was prepared using two roll mill machine. The citronella fibre were undergone alkaline treatment before proceed to compound. Different ratio of filler were prepared with ...
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)
This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ...
Properties of CNTs/Calcium Carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)
In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ...