Search
Now showing items 41-50 of 114
Thermoelectric properties of nickel zinc ferrite–polyester
(Universiti Malaysia Perlis (UniMAP), 2016-05)
An experiment was done on the nickel zinc ferrite (NiZnFe₂O₄) sample with an addition of polyester at different amount (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) to determine the thermoelectric properties of the respective mixed ...
Controlling the synthesis parameter during Fe(OH)₂ precipitation for goethite formation
(Universiti Malaysia Perlis (UniMAP), 2016-05)
Iron oxide were synthesized goethite free of magnetic impurities with different crystal
sizes in different molar ratio and mixing time through the reverse precipitation of
FeSO₄∙7H₂O and NaOH. Mostly goethite mineral ...
Influence of temperature on reduction behaviour of iron ore-coal composite pellets
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This present study investigated about influence of temperature on reduction behaviour in iron ore and coal composite pellet. The objectives about this research were to analyse the reduction behaviour between iron ore and ...
Effect of pyrolysis parameter on properties on polyacrylonitrile (PAN) carbon fibers
(Universiti Malaysia Perlis (UniMAP), 2016-05)
In this study, electrospun fibers were fabricated from polyacrylonitrile (PAN) and
Dimethylformamide (DMF) as solvent by using an electrospinning method. The effect of
pyrolysis parameters on properties of electrospun ...
TensileE, Morphological and propesties of foy protein Isolate/Nanohalloysite composite films
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of nanohalloysite (NH) content and its chemical modifications with methyl
methacrylate (MMA) on the tensile properties, morphological, moisture content and
enzymatic bidegradation of SPI/NH composite films ...
A potential of corncob powder as filler in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Thermoplastic polyurethane(TPU) have been utilized as a matrix filled with corncob
fibers. Thermoplastic polyurethane have been used in broad assortment industries and
for many purpose like automotive, medical and etc. ...
Preparation and characterization of LDPE/TPS blend filled with calcium carbonate
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The characterization of LDPE/TPS composite with calcium carbonate (CaCO₃)
filler was conducted under several measurements such as tensile testing, scanning
electron microscopy (SEM), Thermogravimetric Analysis (TGA) and ...
Welding characteristics of similar and dissimilar metal using resistance spot welding
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The two main areas concern of weld nugget quality from resistance spot welding
processes for galvanized steel joints and galvanized steel with stainless steel joints. This project analyzed only the quality of weld nugget ...
Effect of high temperature exposure on Kaolin geopolymer
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The geopolymer material is a green material which produce less emission of CO2
and less energy consuming material compare to Portland Cement (PC) materials. An
experimental study the effect of high temperature exposure ...
Investigation on thermal-mechanical degradation, rheological and mechanical properties of polypropylene-ethylene/silica composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The thermal-mechanical degradation resulting from heated two roll mill of silica
filled polypropylene-ethylene (PPE) composites was investigated. The influence of
processing temperature and silica loading was studied and ...