Search
Now showing items 11-20 of 35
A potential of corncob powder as filler in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Thermoplastic polyurethane(TPU) have been utilized as a matrix filled with corncob
fibers. Thermoplastic polyurethane have been used in broad assortment industries and
for many purpose like automotive, medical and etc. ...
Preparation and characterization of LDPE/TPS blend filled with calcium carbonate
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The characterization of LDPE/TPS composite with calcium carbonate (CaCO₃)
filler was conducted under several measurements such as tensile testing, scanning
electron microscopy (SEM), Thermogravimetric Analysis (TGA) and ...
Investigation on thermal-mechanical degradation, rheological and mechanical properties of polypropylene-ethylene/silica composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The thermal-mechanical degradation resulting from heated two roll mill of silica
filled polypropylene-ethylene (PPE) composites was investigated. The influence of
processing temperature and silica loading was studied and ...
Development of polymer bio composites utilizing sea shell as filler
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of seashell fillers loading and polypropylene-grafted-maleic anhydride (MA-g-
PP) as a compatibilizer to the physical and mechanical properties were studied. The
compounding of bio-composites was carried out ...
Preparation and characterization of pineapple leaf fiber filled thermoplastic polyurethane composite
(Universiti Malaysia Perlis (UniMAP), 2016-06)
In this paper, the effect of addition the natural fiber as filler in
thermoplastic polyurethane (TPU) has been determined. The pineapple leaf fiber
reinforced with thermoplastic polyurethane has been developed by ...
Effect of particle size on rate sensitivity properties of sawdust reinforced Polyproplene (PP) composites under wide range of strain rates
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Particle size of natural fillers and strain rate can affect the mechanical properties of
composite materials. However, there is limited research was done regarding on sawdust reinforced thermoplastic polymer under wide ...
The use of jackruit peel as filler in polylactic acid biocomposite films: effect of filler modification
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The biocomposite films of jackfruit peel filler (JPF) and poly(lactic acid) (PLA) were
prepared by solution casting method. The effect of jackfruit peel filler (JPF) content and modification of JPF by silane coupling agent ...
Preparation and characterization of Seashell/Copra waste reinforced hybrid polymer composite
(University Malaysia Perlis (UniMAP), 2016-06)
The seashell (SS) and copra waste (CW) filled with polypropylene (PP) composite
was prepared by using Z-blade mixer at 180 ˚C and 15 rpm rotor speed. The effect of
seashell and copra waste loading and the effect of ...
The effect of vulcanization in Natural Rubber (NR) on the properties of Epoxy/NR/Graphene conductive composite
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Natural rubber (NR) was added as secondary matrix and toughening agent into
epoxy/GNP composites to improve properties of the composite. Density, mechanical,
morphology, electrical conductivity and thermal stability test ...
The effect of iron addition and tungsten content on the corrosion resistance of w-pre alloy brass composite
(University Malaysia Perlis (UniMAP), 2016-05)
In this project, the W-pre alloy brass composite is prepared through compacting
method of powder metallurgy. Different composition of brass and tungsten was prepared
and samples with iron addition sintered together using ...