Search
Now showing items 1-10 of 11
Effect of Hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled Low-density Polyethylene (LDPE)
(Universiti Malaysia Perlis, 2008-05)
Effect of hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled LDPE with different filler loading and addition of coupling agent was investigated and compared with each other. ...
Preparation and properties of HDPE composites reinforced with treated bagasse fiber
(Universiti Malaysia Perlis, 2008-04)
Composites of baggase fiber and High Density Polyethylene (HDPE) were investigated. The increases in filler loading have increased the value of tensile strength, flexural
strength, modulus of elasticity, flexural strength ...
Properties of oil palm flour filled Polypropylene composites
(Universiti Malaysia Perlis, 2008-05)
Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...
Properties of pulp fiber filled high density Polyethylene
(Universiti Malaysia Perlis, 2008-04)
In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made
through melt blending and compression molding. HDPE/pulp ...
Building of composite system for Wing using Prepreg
(Universiti Malaysia Perlis, 2008-04)
The effect of fibre reinforcement and resin content on moisture uptake in composite
laminate was investigated. Three materials using identical epoxy resin systems but
different reinforcements glass, kevlar and carbon ...
Rheology behaviour of low density polyethylene / clay composites
(Universiti Malaysia Perlis, 2008-05)
Low density polyethylene (LDPE) composite are prepared by incorporating clay at different loading into LDPE matrix using a Z-Blade Mixer at temperature 1800C and a rotor speed of 50 rpm for 12 minutes. A compatibilizer, ...
A study of microstructure and mechanical properties of copper filled Polypropylene and copper filled Epoxy
(Universiti Malaysia Perlis, 2008-04)
In this project, metal filled polymer composite had been produced by using powder
metallurgy concept and cold pressing method. The processing method had influenced the properties of composite system and to establish the ...
Preliminary study on bagasse fiber with Polystyrene as polymer composites
(Universiti Malaysia Perlis, 2008-03)
The interest in long term sustainability of material resources has make advancements in bio-composites or else name as polymer composite materials which made from natural fibers and resins. Natural fibers reinforced with ...
Influence of chemical treatment on surface morphology of natural fiber
(Universiti Malaysia Perlis, 2008-04)
The interest in using natural fibers in composites has increased in recent years due
their lightweight, non-abrasive, combustible, non-toxic, low cost and biodegradable properties. However, lack of good interfacial adhesion, ...
Dynamic vulcanization of waste paper filled of low density polyethylene (LDPE)/ ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia Perlis, 2008-04)
The effect of filler loading and dynamic vulcanization of paper sludge (PS) filled
LDPE/EPDM was investigated. Blends with different filler loading ranging from 0 to 60 wt % were prepared in Z-blade mixer at 180 °C and a ...