Browsing School of Materials Engineering (FYP) by Subject "Polymer composites"
Now showing items 1-4 of 4
-
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ... -
Preparation and characterization of Seashell/Copra waste reinforced hybrid polymer composite
(University Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The seashell (SS) and copra waste (CW) filled with polypropylene (PP) composite was prepared by using Z-blade mixer at 180 ˚C and 15 rpm rotor speed. The effect of seashell and copra waste loading and the effect of ... -
Properties of carbon nanotubes and calcium carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP)Scholl of Materials Engineering, 2016-05)This project was focused on the fabrication and characterization of CNTs-CaCO3 filled epoxy composites. The polymer composites were prepared with different ratio of filler loading by using a mechanical stirrer with speed ... -
The use of solvents in epoxy/graphene conductive materials
(Universiti Malaysia Perlis (UniMAP), 2017-06)The influences of graphene nanofiller on physical, electrical and mechanical properties of epoxy composite were investigated. Epoxy was loaded with different content of graphene 0, 0.2, 0.4, 0.6, 0.8 and 1.0 vol% via ...