Browsing School of Materials Engineering (FYP) by Subject "Alloys"
Now showing items 1-9 of 9
-
Aging effect of Sn-Ag-Cu lead free solder
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Many issue related to the performance of lead free solder alloys have arisen. So, it should be take concern on it and one of the method is by studying the microstructure of those solder alloys. This because their mechanical ... -
Analysis of Binary Aluminium-Magnesium products with varying composition and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Casting is a process that can produce a complex and complicated component. This final year project is to investigate how far the influence on mechanical properties and microstructure of varying aluminium-magnesium alloy ... -
The anodizing of sintered Mg/Ca alloys
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This project is focusing on the effect of anodizing on the sintered Mg/Ca alloys. The Mg/Ca alloy was fabricated using powder metallurgy method. The Mg powder was mixed with 1 wt.% Ca powder using rotating mill with ball ... -
Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The present study was undertaken to investigate the effect of metallurgical parameters on the hardness, microstructural characterization and porosity of heat-treated 319 alloys, with the aim of adjusting these parameters ... -
The effect of alloying elements in sintered-recycle steel compaction
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of alloying elements in the sintered-recycle steel compaction were studied using powder metallurgy technique. High-energy milling technique was used to crush and mill the waste steel chip in the form of spiral ... -
Effect of Zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focusing on the effect of zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy. The additional of micro-alloying have been developed by using casting technique with different percentage of zinc which ... -
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60% in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ... -
Study on the microstructure and properties of Al-Zn alloy fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the microstructure and properties of aluminium zinc (Al-Zn) alloy with different weight percentage have been studied. This project were carried out by sand casting process. The as-cast sample were prepared ... -
Synthesis and characterization of Corroded anodized coating of Titanium base alloy, Austenitic steel and Aluminium base alloy commercially used
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Involving this project, several techniques used to study the morphological structure as well as characterization of corroded anodized coating of titanium base alloy, austenitic steel and aluminium base alloy commercially ...