Browsing School of Materials Engineering (FYP) by Subject "Materials engineering"
Now showing items 21-32 of 32
-
Observation on the reduction of Iron Oxide by graphite and coke
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This present study is to investigate the reduction of iron oxide with metallurgical coke and graphite used in this project. The purpose of this study mainly was to investigate the possibilities of reducing hematite to ... -
Preparation and characterization of LDPE/TPS blend filled with calcium carbonate
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The characterization of LDPE/TPS composite with calcium carbonate (CaCO₃) filler was conducted under several measurements such as tensile testing, scanning electron microscopy (SEM), Thermogravimetric Analysis (TGA) and ... -
The process of electroplating in presence of Nickel Salts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ... -
Production of particle board from banana leaves
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ... -
Sintering atmosphere effect on Al-0.2Mg alloy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of sintering atmosphere on mechanical properties and microstructure of Al-0.2Mg alloy were investigated. In this study, one type of parameter were used that was; different sintering atmosphere. Al and Mg were ... -
A study of hardcoat anodizing on PM Al-Mg composite
(University Malaysia PerlisSchool of Materials Engineering, 2008-05)This research is being conducted to investigate an effect occurring on anodizing process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ... -
A study of using grass (Malaysian foxtail) fiber in paper making
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A various types of grasses can be found in Malaysia. A few of grass can be used for animal food and as a covering the earth only. More than that, grasses always abandoned or fired. Foxtail grass, also known as ‘rumput bulu’ ... -
Study on different sintering temperature on the composite ferum and cobalt reinforced with silicon carbide
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Particulate-reinforced metal matrix composites (MMCs) have become more attractive to researches because of the problem of anisotropy and high cost of fibre reinforced MMCs. This study involves the fabrication of MMCs with ... -
A study on the purification of Limestone
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research study focused on the purification of limestone by multiple reprecipitation. This study involves the application of different temperature for carbonation process as to observe the reactiveness of particles ... -
Study the effect of replacement of fly ashon ordinary portland cement
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The replacement of fly ash in Ordinary Portland cement have been conducted to measure the strength of concrete in different ratio between fly ash and cement. This research is involved three stage like Raw material analysis, ... -
Synthesis and mechanical properties of alumina slip casting from aluminum tri-hydrate (Al(OH)₃
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This experiment was done to investigate the mechanical properties of synthesized Al(OH)₃ for slip casting process. The Al(OH)₃ precursor was synthesized by two process, calcinations of Al(OH)₃ and leaching along with ... -
Synthesis of Cordierite ceramic using solid state reaction technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this project work, cordierite/ indialite phase was synthesized from three different ratios of powder mixture involved of kaolin, talc and alumina powder. The weight ratios of powder mixtures used in this project were ...