Browsing School of Materials Engineering (FYP) by Author "School of Materials Engineering"
Now showing items 21-40 of 42
-
Mechanical and thermal performance of lightweight geopolymers foamed using aluminium powder
Mohamed Aliff Izham, Mohamed Zakhari (Universiti Malaysia Perlis (UniMAP), 2017-06) -
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method
Poorani, Jaraman (Universiti Malaysia Perlis (UniMAP), 2017-06)In this experimental study, three resistance spot welding parameters were varied on galvanized steel to determine the optimum value of parameters by using the Taguchi method of analysis. Selected parameters are welding ... -
Preparation and characterization of epoxy modified with palm oil based Polyol (POBP) with different curing systems
Nur Haziqah, Abdul Rahman (Universiti Malaysia Perlis (UniMAP), 2016-06)This research concentrates on preparation and characterization of epoxy modified with palm oil based polyol (POBP) with different curing systems. The effect of POBP is investigated with ten ratios of epoxy samples with two ... -
Preparation and characterization of low linear density polyethylene/plasticized jackfruit seeds starch blends
Teh, Yen Rhu (Universiti Malaysia Perlis (UniMAP), 2017-05)The LLDPE/TPS blends were prepared in different blending formulation and additives. The formulation used were divided into 100:0, 95:5, 90:10, 80:20 and 70:30. Preparation of the blends are divided in three stages. The ... -
Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr
Siti Aisyah, Che Sakdun (Universiti Malaysia Perlis (UniMAP), 2017)The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ... -
Properties of CNTs/Calcium Carbonate filled polymer composites
Siti Maisarah, Suhaimi (Universiti Malaysia Perlis (UniMAP), 2017-06)In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ... -
Reactions between Iron Oxide and gangue minerals at 1273 K under Ar atmosphere
Nadia Syafiqah, Zainal Ariffin (Universiti Malaysia Perlis (UniMAP), 2017-06)CO2 discharged from iron and steelmaking companies is an example of the biggest issues for the protection of global environment and sustainable growth of steelmaking industry. One of the ideas to decrease CO2 emission and ... -
Silica extraction from agricultural waste as corrosion inhibitor
Nur Amni, Mohd Ezani (Universiti Malaysia Perlis (UniMAP), 2016-06)Rice husk and rice straw are found abundant as by-product of the the rice milling industry. Both of the agricultural wastes have a great potential to be used as raw material in industry. Rice husk and rice straw normally ... -
Solid electrolyte for intermediate temperature solid Oxide fuel cell
Nurul Fatihah, Ahamad (Universiti Malaysia Perlis (UniMAP), 2020-06)Solid oxide fuel cell (SOFCs) have potential to generate high efficiency electrical energy converted from chemical energy with minimum impact to the environment. This thesis were aimed to study the structure and electrical ... -
Studies of blends of natural rubber and styrene-butadiene rubber/citronella fibre composite: the effect of physico-mechanical properties and morphology
Nur Ainna Syafiqa, Mohd Izhan (Universiti Malaysia Perlis (UniMAP), 2017-06)Rubber composite filled with citronella fibre (CF) was prepared using two roll mill machine. The citronella fibre were undergone alkaline treatment before proceed to compound. Different ratio of filler were prepared with ... -
A study on corrosion behavior of Mild Steel in Granulated Blast Furnace (GBFS) fly ash geopolymer
Siti Farahnabilah, Muhd Amli (Universiti Malaysia Perlis (UniMAP), 2017-04)This research presents the corrosion behavior of mild steel embedded in geopolymer paste that produced by the reaction of fly ash and slag with an alkaline activators (NaOH molarity of 12 M, Na2SiO3/NaOH ratio of 2.5). ... -
Study on the microstructure and properties of Al-Zn alloy fabricated by sand casting process
Syed Mohd Fikri, Syed Sulaiman (Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the microstructure and properties of aluminium zinc (Al-Zn) alloy with different weight percentage have been studied. This project were carried out by sand casting process. The as-cast sample were prepared ... -
Synthesis and characterization of alumina nanoparticles by using a sol gel method
Siti Nur Syakirah, Mohamad Radzi (Universiti Malaysia Perlis (UniMAP), 2017-06)Alumina (Al2O3) nanoparticles were successfully synthesized via sol gel method at different sintering temperature using aluminum nitrate and citric acid with molar ratio 0.5 C/N. The alumina nanoparticles were characterized ... -
Synthesis and characterization of biomimetic of Zinc Oxide
Nur Aziah, Abdul Rahim (Universiti Malaysia Perlis (UniMAP), 2017-06)This research explores the preparation and characterization of zinc oxide catalyst prepared by using mint and pine leaves as template respectively and investigation of its catalytic activity for the photoreduction of Fe3+ ... -
Synthesis and characterization of biomimetic titanium dioxide
Nur Amirah, Che Abdul Hamid (Universiti Malaysia Perlis (UniMAP), 2017-06)Synthesis of titanium dioxide has become popular nowadays. Biomimetic method has been demonstrated to be very effective ways for synthesizing the titanium dioxide as it low cost and environmental friendly. In this research, ... -
Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of carbon nanotubes
Ong, Huey Lin (Universiti Malaysia Perlis (UniMAP), 2017-06)Since its discovery, carbon nanotubes (CNTs) have been widely researched owing to their large potential in nanotechnological applications. The effects of catalyst calcination behavior (temperature and duration) on the ... -
Synthesis and characterization of glass fiber grade specimen using different source of kaolin
Tan, Yan Jun (Universiti Malaysia Perlis (UniMAP), 2017-04)There are many grade of glass that were available in the markets. Different grade of glass can be synthesized by using different sources of raw materials. In this project, glass fiber grade specimen was synthesis using ... -
Synthesis and characterization of lead free SnCu & SnCu/SiC composite solder
Nur Syahirah, Mohamad Zaini (Universiti Malaysia Perlis (UniMAP), 2017-06)The hazardous contain in lead solders have stimulate the current researchers to develop a lead free solders with a same or superior properties. A new approach has been done by introduce a lead free composite solder with ... -
Synthesis and characterization of ternary glass composition derived by sol-gel method
Nik Nur Syahirah, Nik Suhaimi (Universiti Malaysia Perlis (UniMAP), 2017-04)This study was conducted in order to investigate the effect of different Si/Ca ratio (reduced in CaO content) to the properties of ternary glass (SiO2-CaO-P2O5). The glass powder with Si/Ca ratio of 50:45, 70:25 and 90:5 ... -
Synthesis and characterization of TiO2 using sol-gel method deposited on porous cordierite for water treatment application
Ong, Yong Por (Universiti Malaysia Perlis (UniMAP), 2017-05)Titanium dioxide (TiO2) which are the most utilized semiconductors in photocatalytic activity was prepared by sol-gel synthesis method and further dip-coating on macroporous cordierite. The excellent immobilization gave ...