Search
Now showing items 1-5 of 5
Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit Off)
(Universiti Malaysia Perlis, 2008-04)
The purpose of this project are to optimize process variables of WEDM to obtain maximum MRR and minimum surface roughness in rough cutting. This project started with collecting the information from literature review regarding ...
Investigate the effect of cutting parameter pn Ti6Al4V surface in EDM wire-cut
(Universiti Malaysia Perlis, 2008-05)
Titanium aloy is aprovide exellent corrosion resistance, a high strength-to-weight-ratio
and good high temperature. It’s also have very high affinity to oxygen. A natural oxide
layer is always present on the surface. A ...
A study on the machining parameters optimization of WEDW machining TI-6AL-4V: effect on surface roughness, MRR and cutting speed
(Universiti Malaysia Perlis, 2008-04)
The purpose of this project is to optimize the WEDM combination parameters in order to get the highest material removal rate (MRR), fastest cutting speed (CS) and finest surface roughness (SR) on material of titanium alloy ...
Robust setting of Ti-6Al-4V machining using WEDM (Low Energy with Electrolysis Free Circuit Off )
(Universiti Malaysia Perlis, 2008-04)
Titanium alloys such as Ti-6Al-4V are increasingly used in aerospace and automotive industries, and also used as medical implant material in wide variety of
applications. Wire-electro discharge machining (WEDM) is an ...
Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit ON)
(Universiti Malaysia Perlis, 2008-04)
In this project, four Wire EDM parameters (On Time, Off Time, Peak Current and
Wire Speed) were manipulated to achieve the robust setting on material removal rate
(MRR) and surface roughness (Ra) using Ti-6Al-4V titanium ...