Browsing School of Manufacturing Engineering (FYP) by Subject "Cutting machine"
Now showing items 1-4 of 4
-
Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit Off)
(Universiti Malaysia PerlisSchool of Manufacturing Engineering, 2008-04)The purpose of this project are to optimize process variables of WEDM to obtain maximum MRR and minimum surface roughness in rough cutting. This project started with collecting the information from literature review regarding ... -
Robust setting of Ti-6Al-4V machining using WEDM (High energy with EF Circuit Off)
(Universiti Malaysia PerlisSchool of Manufacturing Engineering, 2008-04)In this project, some research had been done on optimization of wire electrical discharge machining (WEDM) parameters. It has been known that WEDM is a specialized thermal machining process which accurately machines parts ... -
Robust setting of Ti-6Al-4V machining using WEDM (High Energy with EF Circuit ON)
(Universiti Malaysia PerlisSchool of Manufacturing Engineering, 2008-04)In this project, four Wire EDM parameters (On Time, Off Time, Peak Current and Wire Speed) were manipulated to achieve the robust setting on material removal rate (MRR) and surface roughness (Ra) using Ti-6Al-4V titanium ... -
Robust setting of Ti-6Al-4V machining using WEDM (Low Energy with Electrolysis Free Circuit Off )
(Universiti Malaysia PerlisSchool of Manufacturing Engineering, 2008-04)Titanium alloys such as Ti-6Al-4V are increasingly used in aerospace and automotive industries, and also used as medical implant material in wide variety of applications. Wire-electro discharge machining (WEDM) is an ...