Final Year Project Papers & Reports: Recent submissions
Now showing items 281-300 of 2464
-
Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of carbon nanotubes
(Universiti Malaysia Perlis (UniMAP), 2017-06)Since its discovery, carbon nanotubes (CNTs) have been widely researched owing to their large potential in nanotechnological applications. The effects of catalyst calcination behavior (temperature and duration) on the ... -
Effect of Zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is focusing on the effect of zinc additions on Sn-0.7Cu-0.05Ni lead free solder alloy. The additional of micro-alloying have been developed by using casting technique with different percentage of zinc which ... -
Effect of Citric acid on properties of Cassava starch foam
(Universiti Malaysia Perlis (UniMAP), 2017-06)The effects of citric acid towards the properties of cassava starch foam was studied in this thesis. The influences of crosslinking on cassava starch was described fundamentally. This include the formation of cell sizes, ... -
The Effect of Granulated Blast Furnace Slag (GBFS) Composition on Geopolymer Paste Properties
(Universiti Malaysia Perlis (UniMAP), 2017)For the research study, I will perform the effect of Granulated Blast Furnace Slag (GBFS) composition on geopolymer paste properties. For my final year project, I will use raw materials of slag and fly ash that was provided ... -
The effect of treated and untreated Citronella filler loading on curing characteristic and mechanical properties of NR/SBR blends
(Universiti Malaysia Perlis (UniMAP), 2017-04)In this research, the effect of treated and untreated of Citronella filler loading from 10 phr until 50 phr on curing characteristic and mechanical properties of NR/SBR blends were studied. The Citronella leaves were ... -
Study on the microstructure and properties of Al-Zn alloy fabricated by sand casting process
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this research, the microstructure and properties of aluminium zinc (Al-Zn) alloy with different weight percentage have been studied. This project were carried out by sand casting process. The as-cast sample were prepared ... -
Properties of CNTs/Calcium Carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ... -
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this experimental study, three resistance spot welding parameters were varied on galvanized steel to determine the optimum value of parameters by using the Taguchi method of analysis. Selected parameters are welding ... -
Effect of MAPP coupling agent on the mechanical and morphological properties of the Polypropylene/Aluminum Hydroxide composites
(Universiti Malaysia Perlis (UniMAP), 2017)To improve the compatibility of aluminum hydroxide (Al(OH)3) and polypropylene (PP), the effect of maleic anhydride-grafted polypropylene (MAPP) on the mechanical and morphological properties of 15 wt.% Al(OH)3/PP composites ... -
Application of Ag/Zno nanoparticles as photocatalyst for self cleaning fabric
(Universiti Malaysia Perlis (UniMAP), 2017-06)This project is to study the ability of ZnO particles as photocatalyst in self-cleaning fabric and to improve the photocatalytic activity of self-cleaning fabric by doping ZnO with Ag nanoparticles. Both ZnO and Ag/ZnO ... -
A study on corrosion behavior of Mild Steel in Granulated Blast Furnace (GBFS) fly ash geopolymer
(Universiti Malaysia Perlis (UniMAP), 2017-04)This research presents the corrosion behavior of mild steel embedded in geopolymer paste that produced by the reaction of fly ash and slag with an alkaline activators (NaOH molarity of 12 M, Na2SiO3/NaOH ratio of 2.5). ... -
Solid electrolyte for intermediate temperature solid Oxide fuel cell
(Universiti Malaysia Perlis (UniMAP), 2020-06)Solid oxide fuel cell (SOFCs) have potential to generate high efficiency electrical energy converted from chemical energy with minimum impact to the environment. This thesis were aimed to study the structure and electrical ... -
Synthesis and characterization of lead free SnCu & SnCu/SiC composite solder
(Universiti Malaysia Perlis (UniMAP), 2017-06)The hazardous contain in lead solders have stimulate the current researchers to develop a lead free solders with a same or superior properties. A new approach has been done by introduce a lead free composite solder with ... -
Synthesis and characterization of biomimetic of Zinc Oxide
(Universiti Malaysia Perlis (UniMAP), 2017-06)This research explores the preparation and characterization of zinc oxide catalyst prepared by using mint and pine leaves as template respectively and investigation of its catalytic activity for the photoreduction of Fe3+ ... -
Anodizing process of Mg alloy using low potential
(Universiti Malaysia Perlis (UniMAP), 2017-04)This project is focusing on the effect of anodizing on the coating Mg alloys. The Mg alloy was cut with constant length and width. The AZ80 is the type of Mg alloy used. It has high strength but also have high corrosion ... -
Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr
(Universiti Malaysia Perlis (UniMAP), 2017)The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ... -
The effect of temperature on the nitriding of Aluminium
(Universiti Malaysia Perlis (UniMAP), 2017-06)In this thesis writing, aluminium undergoes nitriding at three different temperatures which is 600°C, 625°C and 650°C. The surface also have been grind and polish with 800, 320 grinder paper and the other variable is rough ... -
Synthesis and characterization of alumina nanoparticles by using a sol gel method
(Universiti Malaysia Perlis (UniMAP), 2017-06)Alumina (Al2O3) nanoparticles were successfully synthesized via sol gel method at different sintering temperature using aluminum nitrate and citric acid with molar ratio 0.5 C/N. The alumina nanoparticles were characterized ... -
Adsorption of heavy metal ions by using magnetite nanoparticles
(Universiti Malaysia Perlis (UniMAP), 2017-06)This thesis outlines the study of an adsorption of heavy metal ions by magnetite nanoparticles. Magnetite nanoparticles were synthesized from five different concentration of ferrous sulfate heptahydrate, FeSO4.7H2O as iron ... -
Effect of ball to powder ratio and media density on fine grinding and mechanical activation of hematite ores in planetary mill
(Universiti Malaysia Perlis (UniMAP), 2017-06)Raw hematite ore from Kulim, Kedah was mechanically activated using physical technique of powder ball milling. Operational parameter during fine grinding of the hematite ore are ball to powder ratio (3:1, 5:1, 7:1), milling ...