Search
Now showing items 1-7 of 7
Synthesis and electrochemical characterisation of copper oxide using thermal oxidation for glucose detection application
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Copper is material which is good in electrical and thermal conductivity since it
is malleable and machinability. The pure copper with 99.9% of its composition can be
categorized into standard UNS C11000 ETP. Copper oxide ...
Removal of copper ions from aqueous solution by papaya seeds
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Biosorbent has caught the attention in recent days because of its cheap price and its availabilty. Papaya seed is one of the biosorbent which can be obtained easily from Malaysia. Biosorbent was used to remove heavy metal ...
Kinetic study of activated carbon from palm kernel shell for copper removal
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The production of alternative activated carbon has been resolved to replace the costly activated carbon to remove unwanted heavy metals from contaminated water at low cost. Heavy metals are very toxicity and can harm human ...
Kinetic study of Copper (II) ions removal by Axonopus compressus
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Investigation of Axonopus compressus as a potential low-cost bio-adsorbents to
remove Copper (II) ions from aqueous solution in a batch system. Kinetic and isotherm
studies were carried out by studying the effect of ...
Electroplating copper on aluminium alloy
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Electroplating of copper on aluminium alloy surface by using copper sulphate
solution as an electrolyte solution. This study was done to analyse the influence of
voltage (5V-25V) on electroplating of copper on aluminium ...
Effect of temperature of electrolyte and anodizing voltage on the synthesis of CU₂O nanostructures by anodizing
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Nanostructured cuprous oxide were grown by the process of anodization of copper plate
in the electrolyte of ethylene glycol mixed 0.15M KOH + 0.1M NH4F + 3% H₂O for 300 second under varying the conditions including anodizing ...
Hybrid microwave sintering of Fe-Cr-Cu
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Metal Matrix Composites (MMCs) are generally utilized as a part of structure
applications. The motivation to create them is to enhance mechanical properties of the
solid material. Unfortunately, in the previous years the ...