Search
Now showing items 1-10 of 20
Effect of Hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled Low-density Polyethylene (LDPE)
(Universiti Malaysia Perlis, 2008-05)
Effect of hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled LDPE with different filler loading and addition of coupling agent was investigated and compared with each other. ...
Preparation and properties of HDPE composites reinforced with treated bagasse fiber
(Universiti Malaysia Perlis, 2008-04)
Composites of baggase fiber and High Density Polyethylene (HDPE) were investigated. The increases in filler loading have increased the value of tensile strength, flexural
strength, modulus of elasticity, flexural strength ...
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia Perlis, 2008-03)
Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as
CuSiC, is a highly potential heat spreader material ...
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia Perlis, 2008-04)
Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ...
Properties of oil palm flour filled Polypropylene composites
(Universiti Malaysia Perlis, 2008-05)
Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...
Building of composite system for Wing using Prepreg
(Universiti Malaysia Perlis, 2008-04)
The effect of fibre reinforcement and resin content on moisture uptake in composite
laminate was investigated. Three materials using identical epoxy resin systems but
different reinforcements glass, kevlar and carbon ...
Effect of Ethylene Diamine-co-Acrylic acid (EDAA) on properties of Acrylonitrile Butadiene styrene/Waste tyre dust composites (ABS/WTD)
(Universiti Malaysia Perlis, 2008-04)
Effect of coupling agent of ethylene diamine -co- and acrylic acid (EDAA) on properties of waste tyre dust ( WTD ) filled acrylonitrile butadiene stryene has been investigated. The investigation are including on the tensile ...
Characterization and chemical oxidation of Nanoclay filled low density Polyethylene (LDPE) composites: the effect of Poly (acrylic acid)
(Universiti Malaysia Perlis, 2008-04)
The effects of poly(acrylic acid) (PAA) on the characterization and chemical oxidation of low density polyethylene (LDPE) and nanoclay were studied with a Differential scanning calorimetriy (DSC), Thermalgravimetry analysis ...
Rheology behaviour of low density polyethylene / clay composites
(Universiti Malaysia Perlis, 2008-05)
Low density polyethylene (LDPE) composite are prepared by incorporating clay at different loading into LDPE matrix using a Z-Blade Mixer at temperature 1800C and a rotor speed of 50 rpm for 12 minutes. A compatibilizer, ...
Study on the effect of reinforcement particle size parameter on Aluminum metal matrix composite reinforced with Alumina particles
(Universiti Malaysia Perlis, 2008-04)
The physical and mechanical properties of different particle sizes of alumina reinforce
in aluminum metal matrix composite were investigated. In general, P/M aluminum matrix composites exhibit good levels of mechanical ...