Show simple item record

dc.contributor.authorMohd Arif Anuar, Mohd Salleh
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah
dc.contributor.authorThiaghu, Maiteli
dc.contributor.authorNur Syahirah, Mohamad Zaimi
dc.contributor.authorRomisuhani, Ahmad
dc.contributorCenter of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorSchool of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP)en_US
dc.creatorMarliza, Mostapha
dc.date2022
dc.date.accessioned2022-03-16T00:53:27Z
dc.date.available2022-03-16T00:53:27Z
dc.date.issued2019-12
dc.identifier.citationIOP Conference Services: Material Sciences Engineering, vol.701, 2019, 9 pagesen_US
dc.identifier.issn1757-899x (online)
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/74681
dc.descriptionLink to publisher's homepage at https://iopscience.iop.org/en_US
dc.description.abstractThe effect on the addition of optimally ball milled kaolin and fly ash geopolymer ceramic as reinforcement on the morphology and electrical properties of Sn-0.7Cu composite solder were explored. Geopolymer ceramics from fly ash class F and kaolin were prepared using geopolymer technology, milled at various speed and time. 1.0 wt. % of each sample were used to form composite solder via microwave sintered through powder metallurgy method. Structural characterization via SEM reveals that kaolin geopolymer ceramics has nano-sized subangular powder particles with larger amount of open porosity compared to fly ash geopolymer ceramics when milled at optimum speed and time. Four Point Probe test results showed a decreasing trend of electrical resistivity for kaolin geopolymer ceramics as the milling speeds and times increased. Overall, the results compared to electrical resistivity of other composite solder with various typical ceramic reinforcement additions, proves that kaolin geopolymer ceramics reinforcement to be the best option so far in term of morphology, electrical properties and its sustainable manufacturability.en_US
dc.language.isoenen_US
dc.publisherIOP Publishing Ltden_US
dc.subject.otherKaolinen_US
dc.subject.otherGeopolymersen_US
dc.subject.otherFly ash geopolymer ceramicsen_US
dc.titleCharacterization of geopolymer ceramic reinforced Sn-0.7Cu composite solder: effect of milling time and speeden_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1088/1757-899x/701/1/012016
dc.contributor.urlmarliza@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record