Show simple item record

dc.contributor.authorRosnita, Mohamed
dc.contributor.authorRafiza, Abd Razak
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah
dc.contributor.authorRaa Khimi, Shuib
dc.contributor.authorNurul Aida, Mohd Mortar
dc.contributor.authorWarid Wazien, Ahmad Zailani
dc.contributorFaculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorCenter of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorSchool of Materials & Minerals Resources Engineering, Universiti Sains Malaysia (USM)en_US
dc.creatorRafiza, Abd Razak
dc.date2022
dc.date.accessioned2022-03-15T01:09:49Z
dc.date.available2022-03-15T01:09:49Z
dc.date.issued2019-08
dc.identifier.citationIOP Conference Services: Material Sciences Engineering, vol.551, 2019, 8 pagesen_US
dc.identifier.issn1757-899x (online)
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/74637
dc.descriptionLink to publisher's homepage at https://iopscience.iop.org/en_US
dc.description.abstractGeopolymerization consists of several chemical reactions that has been reported widely as an exothermic reaction. Previous studies on heat released during geopolymerization used metakaolin and fly ash of F class as a precursor for geopolymer. Meanwhile, in this study, fly ash of C class is used and a preliminary study has been conducted on determining the exothermic reaction of the geopolymerization with various ratios of solid-to-liquid ranging from 1.5 to 2.5. The amount of heat released was determined by using Differential Scanning Calorimeter. It was proven that different solid-to-liquid ratio affected the amount of heat released during geopolymerization as the highest amount of the heat released were recorded at the optimum solid-to-liquid ratio of 2.0.en_US
dc.language.isoenen_US
dc.publisherIOP Publishing Ltden_US
dc.subject.otherGeopolymerizationen_US
dc.subject.otherGeopolymersen_US
dc.subject.otherFly ashen_US
dc.titleInvestigation of heat released during geopolymerization with fly ash based geopolymeren_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1088/1757-899x/551/1/012093
dc.contributor.urlrafizarazak@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record