Browsing Mr Mohammad Tamizi Selimin by Title
Now showing items 1-6 of 6
-
Coagulation-flocculation process for leachate treatment using PAC and alum
(Universiti Malaysia Sarawak (UNIMAS)Faculty of Resource Science & Technology, 2009-08-03)Sanitary landfill leachate is considered as heavily polluted industrial wastewater, which has extremely high pollution load that may pollute subsoil and ground water. Special attention must be paid for its perfect collection ... -
COD removal from semi-aerobic landfill leachate
(Universiti Teknologi Malaysia (UTM), 2009-06-02)Leachate are heavily polluted liquid which may contain large amount of chemical oxygen demand (COD), biological chemical demand (BOD), ammonia (NH3) and colour. This study was conducted to examine the percentage of COD ... -
Development of pilot plant for novel geopolymer brick making machine
(American-Eurasian Network for Scientific Information, 2013)With rapid growing country's development and rose in construction activity, rising demand of building materials and increased construction wastes have encouraged the development of new building materials. Geopolymer based ... -
Feasibility study on composition and mechanical properties of marine clay based geopolymer brick
(Trans Tech Publications, 2014)Geopolymer is an inorganic polymer performed in synthesis process of an aluminosilicate material which activated by alkaline activator solution. Marine clay, considered to be a waste substance which have an important ... -
Potential of marine clay as raw material in geopolymer composite
(Scientific.Net/Trans Tech Publications, 2012-12)In this research, marine clays has been studied its potential as a matrix composite materials that tend to be used as alternative materials to concrete. The study shows that marine clays which mixed with appropriate ... -
Preliminary study on compressive strength of modified Polystyrene (MPS) as lightweight aggregate
(Universiti Malaysia Perlis, 2008-03-15)This research investigates the possibility of making polystyrene as lightweight aggregate. Low density is the advantage of polystyrene. Waste polystyrene foam is modified and sintered in the furnace at the temperatures ...