Mohd Mustafa Al Bakri Abdullah, Prof. Dr.: Recent submissions
Now showing items 141-160 of 265
-
Microstructure study on volcano ash geopolymer aggregate at different sintering temperature
(Trans Tech Publications, 2014)Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ... -
Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze
(Trans Tech Publications, 2014)Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ... -
The influence of cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends
(Trans Tech Publications, 2014)Cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends were studied. Three different size ranges of rNBR particles, i.e., 150 - 350 ... -
Feasibility study on composition and mechanical properties of marine clay based geopolymer brick
(Trans Tech Publications, 2014)Geopolymer is an inorganic polymer performed in synthesis process of an aluminosilicate material which activated by alkaline activator solution. Marine clay, considered to be a waste substance which have an important ... -
Mean imputation techniques for filling the missing observations in air pollution dataset
(Trans Tech Publications, 2014)Almost all real life datasets consist missing values. These are usually due to machine failure, routine maintenance, changes in siting monitors and human error. The occurence of missing values requires special attention ... -
A new invention of thermal pad using sol-gel nano-silver doped silica film in plastic leaded chip carrier (PLCC) application by using computational fluid dynamic sofrware, CFD analysis
(Trans Tech Publications, 2013)Thermal pad is new technology in the world that been used in PLCC in order to reduce junction temperature to the minimum level in electronic components. Thermal Pad was made by using nano-silver as main material. Nano-silver ... -
Numerical investigation of heat transfer of twelve Plastic Leaded Chip Carrier (PLCC) by using computational fluid dynamic, FLUENT™ software
(Trans Tech Publications, 2013)Plastic Leaded Chip Carrier (PLCC) package has been emerged a promising option to tackle the thermal management issue of micro-electronic devices. In the present study, three dimensional numerical analysis of heat and fluid ... -
The effect of gap between plastic leaded chip carrier (PLCC) using computational fluid dynamic (CFD) software, FLUENT™
(AENSI Publisher All rights reserved, 2013-10)This paper presents the effect of gap between Plastic Leaded Chip Carrier (PLCC) by using three dimensional numerical analysis of heat and fluid flow in computer. 3D model of microprocessors is built using GAMBIT and ... -
The comparison between four PLCC packages and eight PLCC packages in personal computer (PC) using computational fluid dynamic (CFD), fluent software™ using epoxy moulding compound material (EMC)
(Trans Tech Publications, 2013)The paper present the three dimensional numerical analysis of heat and fluid flow through Plastic Leaded Chip Carrier (PLCC) packages in inline orientation horizontally mounted on a printed circuit board in a wind tunnel ... -
Development of nano-material (nano-silver) in electronic components application
(AENSI Publisher All rights reserved, 2013-10)This paper presents the development of nano-material in electronic components especially in Plastic Leaded Chip Carrier (PLCC) application. The effect of nano-material in Plastic Leaded Chip Carrier (PLCC)will improve ... -
Effect of pyrolysis temperature on the synthesis of carbon fiber from natural organic waste
(Trans Tech Publications, 2014)Carbon fibers are produced from natural sources of water hyacinth plants that have been dried, ground and sieved to three different particle sizes of 600 μm, 300 μm and less than 300 μm. Through the analysis of data obtained ... -
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ... -
Influence of dolomite on the mechanical properties of boiler ash geopolymer paste
(Trans Tech Publications, 2014)The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ... -
Filling missing data using interpolation methods: Study on the effect of fitting distribution
(Trans Tech Publications, 2014)The presence of missing values in statistical survey data is an important issue to deal with. These data usually contained missing values due to many factors such as machine failures, changes in the siting monitors, routine ... -
Fire resistance evaluation of lightweight geopolymer concrete system exposed to elevated temperatures of 100-800 °C
(Trans Tech Publications, 2014)This paper reports the fire resistance property of a lightweight aggregate geopolymer concrete (LWAGC) material synthesized by the alkali-activation of locally source fly ash (FA) after exposed to elevated temperatures ... -
Correlating composition design and properties of calcined kaolin geopolymeric powder
(American Scientific Publishers, 2013-12)This paper discussed the relation between composition design and properties of calcined kaolin geopolymeric powder. Geopolymeric powder was produced by applying the geopolymerization process. The solids-to-liquid ratios ... -
Properties of metakaolin geopolymeric binder
(American Scientific Publishers, 2013-01)This paper investigates the physical and mechanical properties as well as the morphology study of the MK geopolymeric binder. Mixture of waterglass liquid and NaOH solution were used as the activator solution for the ... -
On the structure of shape memory alloys
(Trans Tech Publications, 2013-12)The paper presents the obtaining of shape memory alloys, base copper and a diffractometer and microscopic study on some samples. The study was made on CuZnAl samples, obtained by classic casting and educated. The shape ... -
A study on relationship between porosity and compressive strength for geopolymer paste
(Trans Tech Publications, 2013-12)This paper presents a study on the relationship between porosity and compressive strength for geopolymer paste. In this research, geopolymer paste was made from fly ash class F based geopolymer mixed with alkaline activator; ... -
Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength
(Trans Tech Publications, 2013)Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...