Show simple item record

dc.contributor.authorRosemizi, Abd. Rahim
dc.contributor.authorSyed Idris, Syed Hassan, Prof. Dr.
dc.contributor.authorMohd Fareq, Abd. Malek, Dr.
dc.contributor.authorJunita, Mohd Nordin
dc.contributor.authorHaris Fazilah, Hassan
dc.date.accessioned2014-06-02T04:27:41Z
dc.date.available2014-06-02T04:27:41Z
dc.date.issued2013-10
dc.identifier.citationInternational Journal of Engineering and Technology, vol. 5(5), 2013, pages 4423-4430en_US
dc.identifier.issn2319-8613 (P)
dc.identifier.issnhttp://www.enggjournals.com/ijet/vol5issue5.html
dc.identifier.issn0975-4024 (O)
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/34953
dc.descriptionLink to publisher's homepage at http://www.enggjournals.com/en_US
dc.description.abstractThis paper presents a novel design of a harmonic suppression single-fed dual-circularly polarized microstrip patch antenna for a rectenna system in the future wireless power transmission application. The proposed antenna is capable of receiving both types of circular polarization signal; RHCP and LHCP simultaneously and at the same time it also able to filter the unwanted harmonic signals itself. These characteristics are achieved after introducing a circular slot defected ground structure to an array of nearly-square microstrip patch antenna with an offset inset microstrip feeding line and two open stubs on the feeding line. The proposed antenna is very simple on the single substrate only and this led to a reduction of errors that occurs during the fabrication process. However, the most importantly is the possibility of the polarization mismatch during transmission of signal can be minimized and the use of additional harmonic filter circuit can be eliminated. Thus the rectenna system becomes smaller, cheaper, less complexity and more efficient. The overall structure of the proposed antenna is designed on the top surface of the PCB only, thus it can be interfaced with other circuit such as rectifier or other circuit easily. The Computer Simulation Technology (CST) has been used in the simulation and optimization of the design. Finally, for the verification of the design, the prototype of the proposed antenna is fabricated and measured. From the simulation and measurement results, the proposed antenna can be a good choice in the rectenna system for future wireless power transmission application.en_US
dc.language.isoenen_US
dc.publisherEngg Journals Publicationsen_US
dc.subjectCircularly polarizeden_US
dc.subjectDual-circularlyen_US
dc.subjectHarmonic suppressionen_US
dc.subjectMicrostrip patch antennaen_US
dc.subjectRectenna systemen_US
dc.subjectWireless power transmissionen_US
dc.titleHarmonics suppression single-fed dual-circularly polarized microstrip patch antenna for future wireless power transmissionen_US
dc.typeArticleen_US
dc.contributor.urlrosemizi@unimap.edu.myen_US
dc.contributor.urlsyedidris@unimap.edu.myen_US
dc.contributor.urlmfareq@unimap.edu.myen_US
dc.contributor.urljunita@unimap.edu.myen_US
dc.contributor.urlharisfazilah@msi.unikl.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record