Now showing items 1-20 of 218

    • Study of doubly fed induction generator using wound rotor induction machine for wind turbine 

      Nur Atteya, Azmi (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      In 1990s, wind power turbines were characterized by a fixed speed operation. Basically, they consisted of the coupling of a wind turbine, a gearbox and an induction machine directly connected to the grid. Wind energy has ...
    • Fuzzy versus PID control of an inverted pendulum 

      Nur Amalina, Abu Bakar (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-06)
      Nowadays, modern control system engineering is a very important field in industrial and automation system. Control systems give many contributions in the advance of engineering field today. The paradigmatic inverted ...
    • A case study on modelling and design a linear generator (The principle of wave energy plant) 

      Nur Aainaa Kamilah, Said (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Ocean wave energy is an emerging kind of renewable energy and has already been exploited on a small scale. Some technologies are being developed to exploit the large potential of this energy source. One of the main ...
    • A comparative study on suitable high voltage sources for ozone generation 

      Norhasimah, Zainal Abidin (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      This research is about a comparative study on ozone generation via the use of various high voltage sources in various methods to improve efficiency and also focus on the concentration level of ozone generation. Ozone is ...
    • Clamping stress effect to no load noise of single phase transformer 

      Sadanadan, Purayil Govindan (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Single phase transformer can be sources of disturbing and annoying acoustic noise. The transformer core plays a significant role in the noise generation process. The influence of the clamping stress effects on noise levels ...
    • The effect of power quality problem due to unbalance load at LV distribution system 

      Ruzaini, Rosli (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      This report proposes the effect of power quality problem due to unbalance load at LV distribution system. This project aims to monitor, investigate and analyze the power quality problem due to unbalance load at selected ...
    • SMS based car security and parking location finder system 

      Norzafirah, Mohamad Ismail (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Based on the information given by the PDRM, cars which have been stolen can be found fast if the owner reports it by the first hour of the incident. Result shows that 85% chances of catching the thief and obtaining the ...
    • Investigation the effect of zero seq harmonic in delta - wye transformer ramo error 

      Noor Izaida, Mahmad Idris (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011)
      The research presented in this project concerns the sources of harmonic distortion (loads) and the interaction between those and the propagation of the distortion in the power system. Effects on the power system are also ...
    • Investigation the effect of secondary burden of current transformer (CT) 

      Siti Zaharah, Saud (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Current Transformers (CT’s) are instrument transformers that are used to supply a reduced value of current to meters, protective relays, and other instruments. CT’s provide isolation from the high voltage primary, permit ...
    • Mini cygnus mill wind turbine generator 

      Norsyahidah, Abdul Sani (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Renewable energy replaces conventional fuels in four distinct areas: power generation, hot water or space heating, transport fuels, and rural energy services. Renewable energy is derived from natural processes that are ...
    • Investigation of harmonic losses from compact fluorescent lamp due to type of voltage source 

      Nurhidayah, Anuar (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Project reportedly is focus on investigation of harmonic losses result from compact fluorescent lamp usage (CFL) by using a few unique voltage type, which is triangular wave, square wave, combination of third harmonic, ...
    • An investigation of harmonic losses from printer due to type of voltage source 

      Nurhayati, Mohamad Zamri (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      The electricity is use by printer will course the output voltage and current waveform distortion. This distortion may consist of harmonic and will affect a power quality in the power system. This project is to investigate ...
    • Small scale wind power generation 

      Richard, Wong Chung Hie (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      A small scale wind power generation has been designed and developed in this final year project. The small scale wind power generation been developed which almost of 100:1 ratio than wind turbine by using the same concept ...
    • Design and optimization of hybrid power system for remote residential area 

      Samiyah Umill Hakim, Hasan (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      Hybrid power systems, which utilize different renewable resources such as wind, solar, biomass, micro hydro, with fossil fuel powered diesel generator to provide electric power, are well suited for remote rural areas. ...
    • Photovoltaic powered UPS based on microcontroller PIC16F628A 

      Nurul Hamimah, Shahardin (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      AC loads are supplied by main source continuously. Sometimes, main source fails caused of short circuit, fault, equipment problems from main source supply but the load have to run. For this case another source is needed. ...
    • Study on solar cell simulator 

      Raj Kumar, Balakrishnan (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      Photovoltaic is rapidly becoming a mature industry as the performance of photovoltaic system components and the leverage of large-scale industrial production steadily decrease costs. A photovoltaic (PV) system generates ...
    • Laser Control Switch 

      Tan, Khean Hooi (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      Normally remote control performed with either modulated infrared emitters or radio-frequency wireless transmitters. But now a day, not only infrared emitter and radio-frequency wireless can be use as transmitter. Lasers ...
    • Flyback converter rectifier choice 

      Tan, Chong Wooi (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-05)
      The main purpose of this flyback converter is to design a switching power supply. It is an iterative process which involves many variables that have to be adjusted in order to obtain an optimized solution. However, there ...
    • Automation of greenhouse irrigation system using fuzzy logic controller 

      Teoh, Wen Min (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011)
      The idea of automated irrigation is not new, mankind has figured out how to irrigate large areas of foliage through the use of automated and drop irrigation systems. Efficient, automated irrigation systems, which can ...
    • Speed controller for servo motor for industrial purpose 

      Wan Mohd Norhasmi, Wan Hashim (Universiti Malaysia Perlis (UniMAP)School of Electrical Systems Engineering, 2011-04)
      This project is mainly about constructing a DC motor speed controller using microcontroller PIC 16F877A. It is an open loop control system where the output motor speed signal is feedback to the controller by using an ...