| dc.contributor.author | Salmie Suhana, Che Abdullah | |
| dc.contributor.author | Rohaya, Abdullah | |
| dc.contributor.author | Nafisah, Osman | |
| dc.date.accessioned | 2014-05-16T06:34:26Z | |
| dc.date.available | 2014-05-16T06:34:26Z | |
| dc.date.issued | 2014 | |
| dc.identifier.citation | Key Engineering Materials, vol.594-595, 2014, pages 962-966 | en_US |
| dc.identifier.issn | 1662-9795 | |
| dc.identifier.uri | http://dspace.unimap.edu.my:80/dspace/handle/123456789/34448 | |
| dc.description | Link to publisher's homepage at http://www.ttp.net/ | en_US |
| dc.description.abstract | Two-step sintering (TSS) was applied on the BaCe₀.₅₄Zr₀.₃₆Y₀.₁ O₂.₉₅ powder and the effect of the second step temperature (T2) during sintering process on the grain growth, density and hardness is reported. Normal sintering with holding temperature of 1500 °C and four different TSS profiles with four various T2 (1150 °C, 1250 °C, 1350 °C, 1450 °C) were conducted. From the results, sample sintered via TSS at T2 of 1450 °C shows the highest density compared to other samples including sample sintered via normal sintering at temperature 1500 °C. The grain size of the sample sintered at T2 of 1450 °C also smaller than the sample sintered via normal sintering. Result from hardness test proves the hardness also increase when the density increase. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Trans Tech Publications | en_US |
| dc.subject | Barium Cerate-Zirconate | en_US |
| dc.subject | Density | en_US |
| dc.subject | Grain growth | en_US |
| dc.subject | Two-Step sintering | en_US |
| dc.title | Two-step sintering of fine barium cerate-zirconate ceramics electrolyte | en_US |
| dc.type | Article | en_US |
| dc.identifier.url | http://www.scientific.net/KEM.594-595.962 | |
| dc.identifier.doi | 10.4028/www.scientific.net/KEM.594-595.962 | |
| dc.contributor.url | salmie@unimap.edu.my | en_US |
| dc.contributor.url | aya_sofia04@yahoo.com.my | en_US |
| dc.contributor.url | fisha@perlis.uitm.edu.my | en_US |
