Browsing Md. Fazlul Bari, Assoc. Prof. Dr. by Author "Md. Fazlul, Bari"

Now showing items 1-7 of 7

    • The influence of sintering temperature to the physical properties of P/M Co-Cr-Mo (F-75) alloy 

      Zuraidawani, Che Daud; Shamsul Baharin, Jamaludin; Md. Fazlul, Bari (Universiti Malaysia Perlis, 2009-12-01)
      Co-Cr-Mo (F-75) alloys are commonly used for surgical implants because of their strength, corrosion resistance and biocompatibility. Conventionally, fabrication of the alloys has been established using casting technique. ...

    • The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Ahmad Latiffi, A. A. T.; Khairel Rafezi, Ahmad; Md. Fazlul, Bari (University of Malaya, 2009)
      In the present work, mild steel sheets consisting two batches were welded by resistance spot welding at different welding parameters and exposed under different environments. The 5% sodium chloride brine was used in the ...

    • Investigate the liberation of copper from waste Printed Circuit Boards (PCBs) 

      Mohd Zaheruddin, Kasmuin; Aimi Noorliyana, H.; Md. Fazlul, Bari; Sri Asliza, Md. Amin; Faizul, Che Pa; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)
      Nowadays the waste PCBs increasing sharply proportionally the number of personal computers which is 5.7 million in 2005 and the predict amounts, it will be increase to 11.5 Million in 2010 (Unit Perancangan Ekonomi, ...

    • Palm Ash as an Alternative Source for Silica Production 

      Faizul, Che Pa; Abdullah, Chik; Md. Fazlul, Bari (EDP Sciences, 2016)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a useful renewable source for the production of silica (SiO2). Extensive researches have been carried out to extract silica from agricultural ...

    • Preparations and biomedical applications of magnetic nanoparticles and nanocomposites 

      Md. Eaqub, Ali; Md. Fazlul, Bari; Mohd Noor, Ahmad (Universiti Malaysia Perlis, 2009-12-01)
      This review is focused on the current synthetic routes for the preparation of magnetic nanoparticles and nanocomposites as well as their surface modifications with functional groups useful for biomedical applications. Some ...

    • Solid state sintering of Co-Cr-Mo (F 75): Microstructure and properties 

      Shamsul Baharin, Jamaludin; Zuraidawani, Che Daud; Md. Fazlul, Bari (SIRIM, 2010-11-22)

    • A study on floatability of copper using Modified Hallimond Tube 

      Aimi Noorliyana, H.; Mohd Zaheruddin, Kasmuin; Md. Fazlul, Bari; Sri Asliza, Md Amin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Universiti Malaysia Pahang (UMP), 2009-06-20)
      The Floatability of copper on the Modified Hallimond tube depend on lots of parameters such as dosage and types of collector, frother, air flow rate, flotation time, and pH value. All of this parameters give different ...