Azmi, Rahmat, Assoc. Prof. Dr.: Recent submissions
Now showing items 1-20 of 26
-
Corrosion studies of fly ash and fly ash-slag based geopolymer
(IOP Publishing Ltd, 2017-06)This paper presents the results of corrosion studies between Fly Ash Geopolymer (FG) paste and Fly Ash-Slag Geopolymer (FSG) paste. Geopolymer was made from aluminosilicate inorganic polymers mixed with the alkaline activator ... -
Electrochemical corrosion behaviour of Mg-(Ca,Mn) sacrificial anodes
(Trans Tech Publications, 2013)The aim of the study is to identify the effect of Ca in Mg-Mn alloy on electrochemical corrosion behavior for the development of high performance sacrificial anode. Mg alloys were fabricated by casting technique under an ... -
A brief review of layered rock salt cathode materials for lithium ion batteries
(Trans Tech Publications, 2013)Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ... -
The effects of Fe additions on the liquid phase sintering of W- bronze composites
(Elsevier BV, 2009)In this investigation, experiments were conducted to evaluate the effects of Fe additives in the range of 1-5 wt.% on the densification of different compositions of W-pre-alloy bronze compacts sintered isothermally at ... -
Kinetic study of the hydrothermal reaction between lime and rice-husk-ash silica
(Elsevier Limited, 1992)The paper describes a study of the reaction between lime and amorphous silica obtained from rice-husk (93-94% SiO2) under hydrothermal conditions, in the range 80-140°C. The progress of the reaction, conducted in stainless ... -
Electrochemical corrosion behaviour of Mg-(Ca,Mn) sacrificial anodes
(Trans Tech Publications, 2013)The aim of the study is to identify the effect of Ca in Mg-Mn alloy on electrochemical corrosion behavior for the development of high performance sacrificial anode. Mg alloys were fabricated by casting technique under an ... -
Effects of composition on the mechanical properties and microstructural development of dilute 6000 series alloys
(Asian Network for Scientific Information (ANSINET), 2012)The aim of the present investigation is to study the effect of composition on the mechanical properties and microstructural development during thermal treatment of some dilute 6000 aluminium alloys. The alloys were based ... -
Effect of copper (II) acetate pretreatment on zinc phosphate coating morphology and corrosion resistance
(Springer US, 2013)Zinc phosphate coating is widely used for corrosion protection of metallic materials, mainly mild steel. In the present study, the effect of pretreatment with copper acetate solution on zinc phosphate layer properties was ... -
Room temperature anodization of aluminum and the effect of the electrochemical cell in the formation of porous alumina films from acid and alkaline electrolytes
(VBRI Press, 2012)Nanoporous alumina was produced by anodic oxidation of aluminum in both acidic and alkaline electrolytes. Previous reports indicate that nanoporous aluminais mainly produced from strongly acidic electrolytes, and with the ... -
Sintering effects on mechanical properties of Co-HA composite prepared by modified electroless deposition.
(Trans Tech Publications, 2014)Co-HA composite produced using electroless deposition without conventional sensitization and activation treatment was studied with varying sintering temperature (1100°C, 1200°C and 1250°C). The particles size, bulk density, ... -
Effect of different nickel content on the mechanical properties of hydroxyapatite-ni composites from coated powders
(Trans Tech Publications, 2014)HA-Ni composites were fabricated by uniaxial pressing from coated powders, in which HA particles were successfully coated with nickel precursor by the electroless deposition method. The compacted powders sintered at ... -
Development of dense hydroxyapatite-ni by modified electroless deposition technique.
(Trans Tech Publications, 2014)Ni deposited on HA powder was prepared by electroless plating process without sensitization and activation treatment. The deposited powder obtained was characterized by energy dispersive spectroscopy (EDX) and x-ray ... -
Preparation and characterization of Co-HA powder using modified electroless method
(Trans Tech Publications, 2014)C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ... -
A study on relationship between porosity and compressive strength for geopolymer paste
(Trans Tech Publications, 2013-12)This paper presents a study on the relationship between porosity and compressive strength for geopolymer paste. In this research, geopolymer paste was made from fly ash class F based geopolymer mixed with alkaline activator; ... -
Self-compacting high density tungsten-bronze composites
(Elsevier, 2013-07)Green compacts of W–bronze were encapsulated in shells of bronze powder, placed in a ceramic mold and sintered in alumina tube furnace at 1150 °C. Throughout the sintering cooling stage the differential coefficient of ... -
Comparison of liquid phase sintering and Cu-melt infiltration methods to consolidate 80W-Cu composite using nickel as sintering activator
(Trans Tech Publications, 2013)In this article, studies were conducted to evaluate the densification of W- Cu sintered compacts produced using two methods; liquid phase sintering (LPS) and combination of liquid phase sintering and liquid infiltration ... -
The effect of iron fillings waste contents on the attenuation level of anti-radiation shielding concrete
(Trans Tech Publications, 2013)Shielding concretes of different iron filling contents were assessed for their anti radiation attenuation properties. The measurements have been performed by using gamma spectrometer of NaI (Tl) detector, the sources were ... -
The effect of various waste materials' contents on the attenuation level of anti-radiation shielding concrete
(MDPI, Basel, Switzerland, 2013)Samples of concrete contain various waste materials, such as iron particulates, steel balls of used ball bearings and slags from steel industry were assessed for their anti-radiation attenuation coefficient properties. The ... -
Enhanced liquid-phase sintering of W–Cu composites by liquid infiltration
(Elsevier, 2014-03)Full-density of consolidated W–Cu composites produced via conventional sintering method is difficult to achieve. In this work, fully-dense W–Cu composites were developed via the combination of the liquid phase sintering ... -
Electrochemical measurement of PBS using cyclic voltammetry and AAO fabricated at ambient temperature and low potential
(Trans Tech Publications, 2013)Anodic aluminium oxide fabricated at ambient temperature and low potential in phosphoric acid electrolyte was used as the working electrode for the electrochemical measurement of phosphate buffer saline under different pH ...