Search
Now showing items 1-10 of 32
Research development of solder materials and its intermetallic compound (IMC) study
(Scientific.Net/Trans Tech Publications, 2012-12)
Nowadays, the formation and the subsequent growth of the intermetallic compounds (IMCs) and the development of new lead-free solder systems is a major issue in soldering. The excessive growth formation of intermetallic ...
Research advances of composite solder material fabricated via powder metallurgy route
(Scientific.Net/Trans Tech Publications, 2012-12)
Researches and studies on composite solder have been done by many researchers in an effort to develop viable lead-free solders which can replace the conventional lead-based solders as lead is considered as toxic. Solder ...
The effects of tensile and morphological properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) blends
(Scientific.Net, 2012-12)
The effects of tensile and morphological properties of styrene butadiene rubber/virgin chloroprene rubber blends (SBR/CRv) and styrene butadiene rubber/recycled chloroprene rubber blends (SBR/CRr) were investigated. The ...
Effect of pyrolysis on the wettability behaviour of polyethylene terephthalate on petroleum coke
(Scientific.Net, 2012-12)
In depth investigations has been carried out on thermoplastic polymers, polyethylene terephthalate (PET). The interaction between PET and PC substrate was studied to investigate the effect of oxygen-containing polymer on ...
A Study of FTIR, Thermal Properties and Natural Weathering Test on NBRVirgin/Recycled with SBR Blends
(Taylor & Francis, 2012)
The effects of styrene butadiene rubber/virgin acrylonitrile butadiene rubber (SBR/NBRv) blends and styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) blends on properties such Fourier transform ...
High temperature creep and hydrogen embrittlement failure of a steam trap bypass tube
(Trans Tech Publications, 2013)
A coal fired power plant with its normal operation temperature of 540°C in which its steam trap bypass tube in that power plant was totally fractured. The aim of this study is to explore the evidence related to the steam ...
Shrinkage analysis on thick plate part using Response Surface Methodology (RSM)
(EDP Sciences, 2016)
The work reported herein is about an analysis on the quality (shrinkage) on a thick plate part using Response Surface Methodology (RSM). Previous researches showed that the most influential factor affecting the shrinkage ...
Analysis of shrinkage on thick plate part using genetic algorithm
(EDP Sciences, 2016)
Injection moulding is the most widely used processes in manufacturing plastic products. Since the quality of injection improves plastic parts are mostly influenced by process conditions, the method to determine the optimum ...
Effect of kenaf fibre Mat layers and Zinc Oxide Nanoparticle Concentration on the Mechanical and Thermal Properties of ZnONPs/kenaf/polyester Composites
(IOP Publishing, 2018)
Zinc oxide nanoparticle kenaf polyester composite (ZnONPs/kenaf/polyester)
containing 1, 2, 3 and 4 layers of kenaf fibre treated with 40nm 2% (w/w) and 5 % (w/w ) of
ZnONPs were prepared and characterised to evaluate ...
Amino-propyltriethoxysilane Modified Heavy Metal Sensor Based on Silicon Nanowire Arrays
(IOP Publishing, 2018)
Safety of consuming water from various resources can be questioned nowadays due to high content of material that is highly possible to have toxic content and cause permanent damage to human itself. Possible toxic content ...