Search
Now showing items 1-10 of 10
Mechanical properties of dissimilar welds between stainless steel and mild steel
(Trans Tech Publications, 2013)
Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...
Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets
(Trans Tech Publications, 2013)
Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)
Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...
Sustainable porous materials for gas adsorption applications; A concise review
(Trans Tech Publications, 2013)
Many new sustainable porous materials were developed for gas adsorption applications. Common materials such as activated carbon, clay materials and metal organic framework (MOF) that utilized as potential porous adsorption ...
Sand replacement materials (SRM) in sustainable cement composites; A concise review
(Trans Tech Publications, 2013)
This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ...
The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour
(Trans Tech Publications, 2013)
This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ...
Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
(Praise Worthy Prize, 2013)
The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the ...
The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites
(Trans Tech Publications, 2013)
The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...
Joining of dissimilar 6063 aluminium alloy-316L stainless steel by spot welding: tensile shear strength and heat treatment
(Trans Tech Publications, 2013)
Tensile shear strength and ageing treatment of dissimilar 6063 aluminum alloy-316L stainless steel joint fabricated by spot welding were investigated. The results showed that tensile shear strength increased with the ...
Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites
(Trans Tech Publications, 2013)
In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ...