Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Subject "Materials engineering"
Now showing items 1-6 of 6
-
Characterization of F75-HAP produced by Powder Metallurgy method
(Universiti Malaysia Perlis, 2009-12-01)This research was carried out to study the properties of Co-Cr-Mo filled with different composition of HAP that have been prepared by powder metallurgy method. The raw materials used in this research were Co-Cr-Mo powder ... -
Effect of alloying elements (Ni and Cr) on density and hardness of Co alloy fabricated by powder metallurgy
(Universiti Malaysia Perlisp.1-5, 2009-12-01)Influences of Ni and Cr addition on the properties of powder metallurgy Co base alloys were investigated. The alloys were produced by powder metallurgy technique and sintered under argon atmosphere. Scanning electron ... -
The effect of heat treatment on the anode efficiency of Magnesium sacrificial anode
(Universiti Malaysia Perlis, 2009-12-01)High efficiency sacrificial anode from Mg alloy is needed as it has higher capability of protecting underground metal structure against corrosion in cathodic protection. Solution treatment was applied to Mg sacrificial ... -
The effects of solutionizing temperatures on microstructures of as-received A357 alloy
(Universiti malaysia Perlis, 2009-12-01)Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ... -
Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)The microstructure and hardness of A356/stainless steel composite via gravity die casting technique were evaluated. Both nearly completed bonding and incomplete bonding was seen at the stainless steel wire- A356 matrix ... -
Simultaneous extraction and separation of Cu(II), Zn(II), Fe(III) and Ni(II) by polystyrene microcapsules coated with Cyanex 272
(Elsevier B.V, 2009-02)The preparation of polystyrene microcapsules coated with Cyanex 272 (MC-Xs) have been investigated and simultaneous extraction and separation behavior of Cu(II), Zn(II), Fe(III) and Ni(II) in both batch and packed column ...