Browsing Mohd Shukry Abdul Majid, Assoc. Prof. Ir. Dr. by Title
Now showing items 20-39 of 45
-
Hardened Glass Particle and Carbon Black using Resin for Potential Electromagnetic Shielding in Biomedical Electronic Equipments
(IOP Publishing, 2019)This study aims to investigate the electromagnetic properties of a composite of hardened glass particle and carbon using resin in determining the absorbability of the composite for electromagnetic interference (EMI). The ... -
The interlaminar shear strength test of helical wound glass fibre reinforced epoxy laminates subjected to hydrothermal ageing
(Trans Tech Publications, 2014-06)This paper presents the experimental investigation of interlaminar shear strength (ILSS) tests of helical wound glass fibre reinforced epoxy (GRE) pipes subjected to hydrothermal ageing. Currently, the test is being used ... -
Kuin not facing problems, says Azizan
(The Star, 2012-09-27) -
Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate
(Trans Tech Publications, 2013)Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction is ... -
Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on griffith energy release rate
(Universiti Malaysia Perlis (UniMAP), 2013-03-26)Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction ... -
Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes
(Trans Tech Publications, 2013)This paper describes the modeling of multiaxial ultimate elastic wall stress (UEWS) at room temperature for glass fibre reinforced epoxy (GRE) composite pipes. The model developed, predicts the stress-strain response caused ... -
Motorbike engine faults diagnosing system using neural network
(IEEE Conference Publications, 2008-12)Monitoring systems for motorbike industry requires high and efficient degree of performance. In recent years, automatic identification and diagnosis of motorbike engine faults has become a very complex and critical task. ... -
Numerical stress analysis of epoxy adhesively bonded dissimilar joint
(Trans Tech Publications, 2014)A two-dimensional adhesively bonded dissimilar single lap joint model was analyzed under tension. An explicit closed-form solution was formulated by using MATLAB tool for analysis of shear and peel stresses distribution ... -
The Optimization of the Hydroxyapatite (HA) Material Characteristics Produced from Corbiculacea (Etok) Shells
(IOP Publishing, 2019)Hydroxyapatite commonly used in medical field for tissue disease, bone disease, drug delivery and also for non-medical field purpose such as wastewater treatment. Due to excellent biocompatibility and bioactive properties, ... -
Prediction of Reverberation time in university classrooms using Neural Network
(Universiti Kebangsaan Malaysia, 2007)Reverberation time is fundamental to the study of the acoustics of an enclosed space. An important objective of architectural acoustics is to predict the reverberation time in an enclosed space. Reverberation time is also ... -
Qualification and lifetime modelling of fibreglass pipe
(Maney Publishing, 2011-03)Procedures for qualifying fibreglass pipes are discussed here in relation to industry needs. The ultimate elastic wall stress (UEWS) test appears to provide an efficient means of rating pressure pipe, and indeed vessels, ... -
Short-term test of ±55 filament wound GRE composite pipes under multiaxial stress ratios
(Trans Tech Publications, 2014-06)This paper discusses the the development of an automated pressure testing rig to perform a short term test; Ultimate Elastic Wall Stress (UEWS) for ±55˚ glass fibre reinforced epoxy (GRE) composite pipe under various stress ... -
Statistical time energy based damage detection in steel plates using artificial neural networks
(Institute of Electrical and Elctronics Engineering (IEEE), 2009-03-06)In this paper, a simple method for crack identification in steel plates based on statistical time energy is presented. A simple experimental procedure is also proposed to measure the vibration at different positions of a ... -
Steel plate damage diagnosis using probabilistic neural network
(IEEE Conference Publications, 2013-01)This paper discusses the application of frame energy based DFT spectral band features for the detection of damages in steel plates. A simple experimental model is devised to suspend the steel plates in a free-free condition. ... -
Strength of ductile adhesive butt joint bonded with dissimilar adherents: effect of surface roughness
(Trans Tech Publications, 2014-06)The purpose of this project is to study the influence of the macroscopic state of surface roughness of the dissimilar adherent on the strength of adhesive joint. In this project, several types of sandpaper were used to ... -
Strength of three-point-bending ductile adhesive joint with dissimilar adherent
(Trans Tech Publications, 2014-06)In this study, an experimental investigation was conducted in order to determine the effect of different adhesive thickness (i.e., 0.1, 0.5, 0.7 and 1 mm) on strength of ductile adhesive joint. The study scope covers both ... -
Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint
(Elsevier Ltd, 2013)This paper deals with strength and failure prediction as well as reliability issues of adhesive joints of brittle epoxy bonding of two dissimilar adherends. Effects of bond thickness and scarf angle upon the strength of ... -
Stress analysis and failure characterizations of v-shaped epoxy adhesively bonded joint
(Universiti Malaysia Perlis (UniMAP), 2013-03-26)This paper deals with stress and failure characteristics of V-shaped epoxy adhesive joint. Effect of scarf angle upon failure morphology was investigated by tensile test and monitoring using high speed camera. V-shaped ... -
Stress analysis and failure characterizations of V-shaped epoxy adhesively bonded joint
(Trans Tech Publications, 2013)This paper deals with stress and failure characteristics of V-shaped epoxy adhesive joint. Effect of scarf angle upon failure morphology was investigated by tensile test and monitoring using high speed camera. V-shaped ... -
Stress analysis of adhesive bonding of urea granulator fluidization bed
(Trans Tech Publications, 2014-06)Stress analysis of adhesive bonding of urea granulator fluidization bed was performed by using finite element method. The main objective of this project is to develop an alternative joining technique for urea granulator ...