Show simple item record

dc.contributor.authorWan Mastura, W. I.
dc.contributor.authorKamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.
dc.contributor.authorKhairul Nizar, Ismail, Prof. Madya Dr.
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah
dc.contributor.authorMohammed, Bnhussain
dc.date.accessioned2014-02-19T05:09:11Z
dc.date.available2014-02-19T05:09:11Z
dc.date.issued2012-12
dc.identifier.citationW.I. Wan Mastura et al., Advanced Materials Research, vol. 626, 2012, pages 937-941en_US
dc.identifier.issn1022-6680
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/32021
dc.descriptionLink to publisher's homepage at http://www.scientific.net/en_US
dc.description.abstractThis paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator. The experiments were conducted by varying the curing time in the range of 1-24 hours respectively. The specimens cured for a period of 24 hours have presented the highest compressive strength for all ratio of fly ash to sand. For increasing curing time improve compressive strength and decreasing water absorption.en_US
dc.language.isoenen_US
dc.publisherScientific.Net/Trans Tech Publicationsen_US
dc.subjectBricken_US
dc.subjectCompressive Strengthen_US
dc.subjectFly ash (FA)en_US
dc.subjectGeopolymeren_US
dc.subjectGeopolymerizationen_US
dc.titleThe effect of curing time on the properties of fly ash-based geopolymer bricksen_US
dc.typeArticleen_US
dc.identifier.urlhttp://www.scientific.net/AMR.626.937
dc.contributor.urlwanmastura89@gmail.comen_US
dc.contributor.urlvc@unimap.edu.myen_US
dc.contributor.urlnizar@unimap.edu.myen_US
dc.contributor.urlmustafa_albakri@unimap.edu.myen_US
dc.contributor.urlbnhusain@kacst.edu.saen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record