Search
Now showing items 1-8 of 8
The effects of multiple zincation process on Aluminum Bond Pad surface for Electroless Nickel Immersion Gold deposition
(American Society of Mechanical Engineers (ASME), 2006-09)
This paper reports the effects of a multiple zincation processon the Al bond pad surface prior to electroless nickel immersion gold deposition. The study of multiple zincation comprises the surface topogtaphy and morphology ...
Nanowire formation for single electron transistor using SEM based Electron Beam Lithography (EBL) technique: Positive tone vs negative tone e-beam resist
(Nano Science and Technology Institute, 2006)
Experimental studies of nanowires formation are carried out by using Scanning Electron Microscope Based Electron Beam Lithography (EBL) Technique with critical dimensions in less than 100nm. In order to complete the design ...
Reproducibility of silicon single electron quantum dot transistor
(Nano Science and Technology Institute, 2006)
In principle, based on the form of tunnel junction, single electron transistor (SET) can be classified into four types, i.e. nanowire SET, quantum dot SET, nanotube SET and point contact SET. Another classification is SET ...
The characterization of power supply noise for optical mouse sensor
(Institute of Electrical and Electronics Engineering (IEEE), 2006)
The induced power supply noise (sinusoidal waveform) that injected to Vdd pin will cause unwanted spike at the positive amplitude and negative amplitude to the DC input voltage. At certain limit this spike will cause the ...
Characterization of robust alignment mark to improve alignment performance
(Institute of Electrical and Electronics Engineering (IEEE), 2006)
Overlay requirement is one of the biggest obstacles in achieving a very small feature. With the continued growth of small feature size, overlay requirement becomes tighter. Such a tight requirement requires a very high ...
Characteristics of Serial Peripheral Interfaces (SPI) timing parameters for optical mouse sensor
(Institute of Electrical and Electronics Engineering (IEEE), 2006)
In this paper we report the characterizations results of Serial Peripheral Interface (SPI) timing parameters for optical mouse sensor. SPI is an interface that facilitates the transfer of synchronous serial data. It supports ...
Design of 100nm single-electron transistor (SET) by 2D TCAD simulation
(Institute of Electrical and Electronics Engineering (IEEE), 2006)
One of the great problems in current large-scale integrated circuits (LSIs) is increasing power dissipation in a small silicon chip. Single-electron transistor (SET) which operate by means of one-by-one electron transfer, ...
Alignment mark architecture effect on alignment signal behavior in advanced lithography
(Institute of Electrical and Electronics Engineering (IEEE), 2006)
The downscaling of CMOS technology becomes a challenge to the scanner alignment system since overlay and alignment accuracy becomes tighter. Such a tight overlay requirement requires a very stable alignment performance. A ...