dc.contributor.author | Nor Aisyah, Jusoh | |
dc.date.accessioned | 2013-02-16T07:11:35Z | |
dc.date.available | 2013-02-16T07:11:35Z | |
dc.date.issued | 2011-05 | |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/23614 | |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | Used of Recycled Aggregate (RA) in concrete can be described in environmental protection and economical terms. The application of recycled aggregate to use in construction activities have been practice by developed European countries and also of some Asian countries. This paper reports the results of an experimental study on the mechanical properties of Recycled Aggregate Concrete (RAC) as compared to Natural Aggregate Concrete (NAC). The effects of size of RA on compressive strength were investigate in this study. The 100 % of RA used in concrete mix to replace the Natural Coarse Aggregate (NCA) in concrete with 100 mm x 100 mm x 100 mm cube were cast with target compressive strength is 20 MPa. The compressive strength was crushed at 7, 14, 28 days are reported. It was found the size of 10mm and 14 mm of RA in RAC is quite similar performance with 10mm and 14mm size of Natural Aggregate (NA) in Natural Aggregate Concrete (NAC). Results showed that the strength of recycled aggregate concrete for the 15% mixture of limestone at 7, 14 and 28 days was higher than the recycled aggregate concrete mixture of 5% and 10% limestone at 7, 14 and 28 days. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Recycled Aggregate (RA) | en_US |
dc.subject | Construction industry | en_US |
dc.subject | Concrete | en_US |
dc.subject | Environmental pollution | en_US |
dc.title | Influence of mineral additions on the Recycled Aggregate Concrete | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Roshazita Che Amat | en_US |
dc.publisher.department | School of Environmental Engineering | en_US |