Search
Now showing items 11-20 of 142
Rapid prototyping of wood-based material
(Universiti Malaysia Pahang, 2009-06-20)
This paper presents initial development of
wood-based composites with the aim to develop an
alternative material at low cost for rapid prototyping
process. Powder blends containing wood powder (90-
120μm) with commercial ...
Tan delta and capacitance characteristics of underground XLPE cables – 11 kV
(Universiti Malaysia Pahang, 2009-06-20)
There are several appropriate
techniques can be used in order to show the
characteristics of aged and unaged underground
XLPE cables after sometime in service. From the
characteristics, performance of the cables can ...
Analyses on the different configurations of series-shunt SPDT switch for wireless digital communication system at 2.4 GHz
(Universiti Malaysia Pahang (UMP), 2009-06-20)
Single pole double throw (SPDT)
switch is commonly used in radio frequency (RF)
transceiver system for time division duplex (TDD)
operation of digital communication system. The
proper selection of SPDT switch topology ...
Image feature extraction for image database content description: Indoor room images
(Universiti Malaysia Pahang (UMP), 2009-06-20)
This paper presents the theoretical concept and design of image feature extraction by using selected hybrid image feature extraction techniques; the combination of Scale-Invariant Feature Transform (SIFT), Elastic Bucket ...
Design, simulation and characterization of 50nm p-well MOSFET using Sentaurus TCAD Software
(Universiti Malaysia Pahang, 2009-06-20)
Device 50nm p-well MOSFET was designed, developed and optimized based on 90nm recipe using Sentaurus TCAD Software. In this project, there are two sub-programs used which are Sentaurus Process and Sentaurus Device. Sentaurus ...
A comparison of palm oil based wax with paraffin industrial wax for engineering applications
(Universiti Malaysia Pahang, 2009-06-20)
Machining is a mechanical process
where access material from a work piece can be
removed by cutting action to produce a part of
specified geometrical shape and surface finish.
Machining can be performed on virtually ...
Effect of small addition of Al to SnZn solder alloys
(Universiti Malaysia Pahang, 2009-05-20)
The effects of Al on melting,
microstructure and hardness properties
of Sn9Zn lead free solders were
investigated. SnZnAl solder in this study
were produced via melting and casting
method. Thermal properties (Tm) of ...
Improvement of fishing reel design by Design for Analysis (DFA) method
(Universiti Malaysia Pahang, 2009-06-20)
A new improvement of fishing reel
design is introduced by implementing Design
for Assembly method. The main product is
Alvey Side Cast Reel 500A5 which is one of
the current fishing reel models. This product
utilized ...
Development of interactive digital MSI circuit model via Microsoft Excel
(Universiti Malaysia Pahang, 2009-06-20)
This paper describes how a spreadsheet
application (Microsoft Excel) can be used to model a
74LS83 (4-bit parallel binary adder) Medium Scale
Integration (MSI) circuit operation. Using a spreadsheet
application rather ...
Modification of weight function method to predict stress intensity factors of two cracks
(Universiti Malaysia Pahang, 2009-06-20)
The stress intensity factor K is a very
important parameter in fracture mechanics. For
example, it is needed to calculate critical crack
length and remaining strength or life for structural
components which contain ...